Carving Machine

Carving Machine

The difference between the scope and model of the tape cutting machine

Adhesive paper cutting machine M-3000-NMSR

Features:
It has the function of setting 3 different lengths. The configuration has an up-down counter.
Most suitable for independent production. Suitable for neutral production lines. Various adhesive tapes that are commercially available can be used. Automatically transfer and cut automatically in a certain size.

Specifications:
Tape width: 20mm-75mm
Tape length setting range: 40mm-999mm Maximum tape outer diameter: 210mm
Power supply: AC 230V 50/60Hz (110V, 117V is also available)

Carving Machine

Tape cutting machine features ---

1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.

Carving Machine

GL- 320 Type High Speed CE Insulation Paper Die Cutter Machine:

一. Application
It is suitable for cutting various materials, double sided adhesive, plastic-sided, self-adhesive labels, foam, film, foil, and so on.
Applicable to the electronics, automotive, medical, and printing products processing.

二.  Functional characteristics:
A. speed: 0-65m/min, max width of original 330 mm.
B. Precision of die cutting: ±0.01mm, the precision of slice: ±0.01mm
C. Max sizes of finished die cutting:300mm*290mm, min width:80 mm
D. Winding/rewinding tension controlled by the computer fully automatically, its max tension: 15N
E. The operating panel adopts 5.7 inch color touching interface
F. It can operate the fully or semi cutting working( when operating, needless to adjust the pressure or others)
G. It can finish the semi cutting. Its min. thickness: 0.025mm
H. It can count meter/amount with the function of meter/ amount full to stop as well as no feeding to stop.

三.  Main devices:
1. 1 sets of die cutting work station .
2. The work station drive by 3 Yaskwa Servo motor .
3. 2 sets of winding/ rewinding systems, ( converter, magnetic powder clutch)
4. Control color touching interface
5. Power of equipment: 8  kw

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com