The difference between the scope and model of the tape cutting machine -
Non-stick wheel type tape machine TDA080-NS
Configure specially processed rollers that are not easily attached to the rollers.
Suitable for foam tape, double-sided tape (double-sided tape without bottom paper can also be used). Specialized heavy duty cutting machine for industrial use. Suitable for work of more than 8 hours a day.
The automatic transfer cutting function can be used for structural lengths greater than 70 mm. For special models, please test the tape before purchasing. Designed on the basis of TDA080.
Specifications: Tape width: 13-80mm
Tape length setting range: 40-9999mm Maximum tape outer diameter: 230mm
Power supply: AC 100V 50/60Hz (117V, 230V is also available)
Tape cutting machine features ---
1. The tape cutting machine adopts no roller design, which is convenient for operation.
2, the maximum width of the cutting is 60mm (see machine parameters below), this must be understood before use, to see if it meets the width of the tape you want to cut.
3, tape cutting machine with memory function, according to the length of the tape cut usually from the set of six different cutting lengths, you can call directly after the need to set up.
4, install the tape, through the elastic film auxiliary shaft, so it is easier to fix the film to prevent the tape roll from falling.
5, tape cutting machine with counting function, you can set the amount to be cut.
6. Two rolls of tape can be used at the same time, but the total width should be within the width parameter of the tape cutter.
7. Be careful when taking the tape. Although the tape cutter is equipped with a protective device and a safety guard at the knife edge, try not to approach the knife edge.
8, accurate digital control cutting length, you can set the length you want to cut.
9. It is not necessary to adjust the tape cutter because of the thickness of the tape.
10. The tape cutting machine has built-in pliers, lubricating oil and partition for easy operation.
11, anti-static ABS material
12. Improve safety. When the warning device is operated and the tape cutter is suspended, even if the blockage is removed, the tape cutter will not operate immediately. You need to press the start button again to use it normally.
paper cutting machine, touch screen paper cutting machine, cutting machine with high quality and reasonable price.
1. Standard design, infrared raster protect (front), protective guard (back), high security.
2. Separate press and cutting device.
3. Oblique blade cutting tech.
4. Micro-adjust tech.
5. Double lead rail to push the paper pile.
6. Advance eclectric motor.
7. Programed control design.
8. Numerical display the cutting position.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc