The relationship between the tape cutting machine and the tape -
2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.
1300mm Masking tape jumbo roll cutting cutter machine:
1. Automatic consecutive 4-shaft changing:
when the rewinding operation is finished on one set of shafts, the machine will change automatically onto another set of shafts without any stop. It will have higher efficiency.
2.Three-step length counter: Giving accurate pre-setting of rewinding length.
3. Pneumatic brake: Brings the machine to an immediate halt when working at high speed because of inertia ,ensures excellent steady performance .
4. Automatic tension control
5. (Optional) Auto labeling and slitting stationery tape functions
6. (Optional)auto loading device for heavy jumbo roll
Suitable for BOPP tape,PE,PET,masking tape,double-side tape,release paper and many other adhesive tape and non-adhesive tape.
1)Main driving part:Taiwan AC motor with inverter is employed.
2) Central control unit:Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting
3) Operating panel:All functions are operated on the 10" LCD touch panel.
4) Motor control system:The central control system is PLC programmablecontroller.
5) Cutting positioning system:Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear.
6)Blade feeding positioning system:Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.
7) Auto angle adjustment of circular blade:Mitsubishi servo motor is used to calculate thecircular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
8)Quick shaft change system:Three kinds of shafts are available and quick change of shafts is applied for different materials.