The relationship between the tape cutting machine and the tape -
3: To say whether the tape cutting machine can meet the needs of customers, there is no doubt that in answering, Hongjin can definitely pick a tape cutting machine and label stripping machine suitable for customers, and the series of products of Hongjin automation equipment brand. , a total of 12 models. Guolian's tape cutting machine is the narrowest and can cut 3mm adhesive tape, the widest can cut 100mm adhesive tape, and the common specifications of several adhesive paper are 72mm, 60mm, 50mm, 36mm, etc.; Guolian tape cutting machine The length that can be cut is in the range of 5-999 mm. Common lengths are 65m, 75m, 106m. In addition to meeting the cutting requirements, Guolian's tape cutters have both manual and automatic modes, memory functions, and can also cut various types of adhesive tape.
Automatic adhesive tape log roll cutting machine:
Automatic adhesive tape log roll cutting machine is designed to cut large diameter foam tape,double sided tape,masking tape ,non-woven tape,protective tape ,PET,PE electric protective tape, and all kind of adhesive tape from large width cut into small width.
1) Main driving part : Using AC motor with inverter is employed ,the acceleration and the deceleration are fast and steady .
2)Silicon solution cooling system, avoiding cutter getting sticky which can make sure that the cutting process are all right.
3) Accurate cutting position: using servo motor to drive, used with perfect ball screw, linear or bit to make sure the cutting process accurate and perfect.
4) The face and back tube are supported by oil pressure to ensure the stability of mini pathway when it was cut.
5) Round knives cutting promotes the working efficiency.
6）Cutting feed positioning system : Servo motor control ,3 phase speed feed ,improve efficiency and get best quality .
7)Setting a variety of sizes coaxial and automatically converts cutting .
Suitable for BOPP tape,PE,PET,masking tape,double-side tape,release paper and many other adhesive tape and non-adhesive tape.
1)Main driving part:Taiwan AC motor with inverter is employed.
2) Central control unit:Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting
3) Operating panel:All functions are operated on the 10" LCD touch panel.
4) Motor control system:The central control system is PLC programmablecontroller.
5) Cutting positioning system:Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear.
6)Blade feeding positioning system:Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.
7) Auto angle adjustment of circular blade:Mitsubishi servo motor is used to calculate thecircular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
8)Quick shaft change system:Three kinds of shafts are available and quick change of shafts is applied for different materials.