Tape cutter model difference ---
The tape cutter GL-3700 is a disc tape cutter that does not have any curling when cutting the tape. The tape is cut very neatly and tidyly; the tape cutter does not need to adjust the blade; there is a handle in the middle of the machine. It is used to adjust the length of the tape cutting. The closer the handle is to the disc, the shorter the length of the tape cutting. Conversely, the farther away, the longer the tape cutting length; the cut tape will be automatically pasted on the disc. It is convenient for staff to use.
Suitable for BOPP tape,PE,PET,masking tape,double-side tape,release paper and many other adhesive tape and non-adhesive tape.
1)Main driving part:Taiwan AC motor with inverter is employed.
2) Central control unit:Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting
3) Operating panel:All functions are operated on the 10" LCD touch panel.
4) Motor control system:The central control system is PLC programmablecontroller.
5) Cutting positioning system:Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear.
6)Blade feeding positioning system:Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.
7) Auto angle adjustment of circular blade:Mitsubishi servo motor is used to calculate thecircular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
8)Quick shaft change system:Three kinds of shafts are available and quick change of shafts is applied for different materials.