Tape cutter model difference ---
The tape cutting machine GL-7000 and GL-5000 are similar. It is a rollerless design with a set memory function. The film can be easily fixed through the elastic film auxiliary shaft. The safety bezel is added at the edge of the knife. Built-in pliers and lubricating oil. The partition is for easy operation and the latest anti-static ABS material. The tape cutter GL-7000 is arguably the most practical machine.
The main products of Zhengzhou Guolian Machinery Co., Ltd. are tape cutting machine GL-3700, tape cutting machine GL-5000, tape cutting machine GL-7000 and other brand-name tape cutting machines. Welcome customers from all over the world to come and discuss cooperation!
BOPP/Masking/Kraft/Foam Tape Automatic Cutting Machine:
Suitable for cutting various tape, such as: BOPP, PVC, PE, masking tape, double sided tape, kraft paper tape, foam tape, industrial tape and paper, film, etc.
1) Cutting shaft and circular blade are driven by MITSUBISH inverter and A.C motor.
2) The acceleration and deceleration are fast and steady and running direction: forward/reverse upon setting.
3) Cutting width setting is controlled by MITSUBISH servo motor, ball screw, guide rails for precise movement.
4) MITSUBISHI PLC programmable central control and all functions operate under LCD touch screen panel which is for all data setting.
5) Knife feeding is controlled by MITSUBISHI servo motor and the cutting speed is adjustable in 3 stages.
6) Circular blade angle auto adjustment is controlled by SANYO step motor or MITSUBISHI servo motor which is used to calculate the circular blade angle and the angle change is subject to different raw materials ( the angle change range is ±8°for single shaft cutting and ±3° for double shafts and four shafts cutting). The cutting angle is changed directly when the cutting surface is not smooth, so the efficiency is improved.
7) Three kinds of shafts size are available, quick change of shafts are suitable for different raw materials.
Suitable for BOPP tape,PE,PET,masking tape,double-side tape,release paper and many other adhesive tape and non-adhesive tape.
1)Main driving part:Taiwan AC motor with inverter is employed.
2) Central control unit:Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting
3) Operating panel:All functions are operated on the 10" LCD touch panel.
4) Motor control system:The central control system is PLC programmablecontroller.
5) Cutting positioning system:Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear.
6)Blade feeding positioning system:Blade feeding is controlled by Mitsubishi servo motor,and the cutting speed is adjustable in three stages.
7) Auto angle adjustment of circular blade:Mitsubishi servo motor is used to calculate thecircular blade angle and the angle change is subject to different materials (the angle change range is ±8°).
8)Quick shaft change system:Three kinds of shafts are available and quick change of shafts is applied for different materials.