Semi-automatic cutting machine technical operation rules
7. Regular inspection of accuracy and variability
7.1 Detect the positive and negative turbulence of the main motion clutch after it is closed. The value is less than 2.0mm.
7.2 Detecting the running speed adjustment range of the host: the minimum speed is not more than 50mm/min, and the maximum speed is not less than 120mm/min.
7.3 Detecting the gas path part includes the connection of the connecting hose: air tightness: oxygen closed circuit 1.2Mpa, mixed gas path: 0.6 Mpa voltage regulation for 20 seconds shall not leak.
7.4 Detecting the thickness range of the cut steel plate: 10-100mm is acceptable.
7.5 Flame burning test of the torch (visible cutting oxygen flow length): 1#≥70mm; 2#≥90mm;3#≥100mm.
8. Daily maintenance regulations
8.1 After cutting the mouth, pay attention to the protective cover of the fashion, and do not bump.
8.2 Pay special attention to moisture when using and storing.
8.3 The lubricant in the gearbox should be replaced in time.
1. Using ultrasonic cutting and edge treatment for melting, so smooth, no rough edges.
2. PLC touch-screen, automatic feed, the computer count, high precision, speed and adjust the length of simple and quick, efficient.
3. Widely been used in gifts belt, nylon belt strip, strip Ribbon, ribbon bar, such as chemical fiber cut straight knife, knife ramps, such as shape Dovetail
4. This machine can cut different shapes of the products, just need to change the cut knife. And also can cut Like:
suitable for cutting roll materials:such as BOPP, foam tape, masking tape, duct tape,double sided tape,cloth tape,industrial tape, protection film, roll papers etc.
1. Main driving system: AC motor with inverter is employed.
2. Operating panel: All functions are operated on the 10" LCD touch panel.
3. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
4. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor.
The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
5. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
6. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (The angle change range is ±8°).
7. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc