Semi-automatic cutting machine technical operation rules
5. Control and monitoring methods for mechanical process parameters and characteristics
5.1 When installing the cross rail and main rail, pay attention to the adjustment screw should not be too tight or too loose. 5.2 The cutting tip should be installed so that it should not be tightened too tightly, no air leakage.
5.3 Before using the suction-type torch, the gas injection must be checked and pressed with the finger on the acetylene inlet valve head. Then open the oxygen valve and the acetylene valve. If there is suction on the finger, it means the torch is normal and can be used. If there is no suction, or oxygen flows back from the B-connector, the torch performance is abnormal and must be repaired.
6. Provisions for mechanical supervision and inspection
6.1 The cutting machine should pay attention to the good condition of each part in normal use, and solve the problem if it is found in time.
6.2 Strengthen maintenance and repairs should be carried out every year.
Film /Paper/ fabric roll cut tape slitting machine is used for slitting or cutting various widths of materials into a small tape roll.
It is suitable for slitting or cutting: cloth, non-woven fabric, tent, umbrella, sponge foam, leather, reflective material, plastic, paper, double side adhesive tape, acetate various fabric, reinforced tape, electric conductive fabric, copper foil and etc.
and the tape slitting process is like this:
A roll of fabric, film or paper is loaded onto the axis, the machine will roll cut or slit this fabric roll ( film roll or paper roll ) into a small tape roll in designate width.
for packaging food:
large rolls of plastic film such as biaxially orientated polypropylene (BOPP), paper or adhsive tape is produced in large diameter roll for maxium efficiency.
the roll are then slit by a tape slitting machine into small rolls of the size to used on the packaging machine.
for Apparel and home use products:
large rolls of fabric or cloth can be slit into various width tape to used as the piping or decoration on the apparel.
and the slitted tape can also be used as the raw material for tape edging the mattress, or for mattress border decoration.
It is suitable for cutting various materials, double sided adhesive, plastic-sided, self-adhesive labels, foam, film, foil, and so on.
Applicable to the electronics, automotive, medical, and printing products processing.
二. Functional characteristics:
A. speed: 0-65m/min, max width of original 330 mm.
B. Precision of die cutting: ±0.01mm, the precision of slice: ±0.01mm
C. Max sizes of finished die cutting:300mm*290mm, min width:80 mm
D. Winding/rewinding tension controlled by the computer fully automatically, its max tension: 15N
E. The operating panel adopts 5.7 inch color touching interface
F. It can operate the fully or semi cutting working( when operating, needless to adjust the pressure or others)
G. It can finish the semi cutting. Its min. thickness: 0.025mm
H. It can count meter/amount with the function of meter/ amount full to stop as well as no feeding to stop.
三. Main devices:
1. 1 sets of die cutting work station .
2. The work station drive by 3 Yaskwa Servo motor .
3. 2 sets of winding/ rewinding systems, ( converter, magnetic powder clutch)
4. Control color touching interface
5. Power of equipment: 8 kw
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc