Tape cutting machine --- function
According to the application range of the tape cutter, the general tape cutter has the following functions: it can cut different materials such as tape, adhesive tape and protective film. You can simultaneously clamp two rolls of tape while cutting. Memory function, turn it off and then turn it on, and still save the original data. Cyclic cutting function, free to set different lengths of cyclic cutting, can cut different thickness of adhesive tape. The safety performance is high. The safety baffle is designed at the cutter. When the machine is blocked, the alarm device works automatically. Even if the blockage is cleared, the machine will not work immediately. You must press the start button again to continue working. Tape cutters are usually designed with no rollers.
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
4. Motor control system: The PLC programmable controller.You can set up various cutting size in the same log roll.Can be adjusted cutting size according to the set up cutting width and cutting roll quantity.
5. Cutting size positioning system: The Mitsubishi servo motor control.Make sure the high accuracy of the ball screw and the linear slide rail positioning in the cutting.
6. Feed positioning system: The Hydraulic motor / Mitsubishi servo motor to control the knife feeding.It can be anthropomorphized as a three-step feeding speed of the cutter.
Improve efficiency and get the best quality.
It is suitable for cutting various materials, double sided adhesive, plastic-sided, self-adhesive labels, foam, film, foil, and so on.
Applicable to the electronics, automotive, medical, and printing products processing.
二. Functional characteristics:
A. speed: 0-65m/min, max width of original 330 mm.
B. Precision of die cutting: ±0.01mm, the precision of slice: ±0.01mm
C. Max sizes of finished die cutting:300mm*290mm, min width:80 mm
D. Winding/rewinding tension controlled by the computer fully automatically, its max tension: 15N
E. The operating panel adopts 5.7 inch color touching interface
F. It can operate the fully or semi cutting working( when operating, needless to adjust the pressure or others)
G. It can finish the semi cutting. Its min. thickness: 0.025mm
H. It can count meter/amount with the function of meter/ amount full to stop as well as no feeding to stop.
三. Main devices:
1. 1 sets of die cutting work station .
2. The work station drive by 3 Yaskwa Servo motor .
3. 2 sets of winding/ rewinding systems, ( converter, magnetic powder clutch)
4. Control color touching interface
5. Power of equipment: 8 kw
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc