Guolian Machinery -- GL-5000 Tape Cutting Machine
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.
The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.
Cutting length: 5 ~ 999 mm
Tape width: 6 ~ 50 mm
Maximum outer diameter: 300 mm
Speed: 200 mm/min
Weight: 2.8 kg
Size: 115mm X 140mm X 215mm
This machine is suitable for PP belt,zipper,nylon belt braided belt,elastic belt,magic stick,seat belt,shoulder belt,ribbon,tape,wire,casing,etc for Fixed length cutting.Suitable for belt,ready-made clothing,shoe making,leather bag,leather goods.Electronic and other manufacturing processing.
1 High speed: It can cut 100-120mm pieces per minute (50mm length as an example)
2 High precision : Cut-length is accurate owing to the control of microcomputer
3 section neat: hot knife can heat-seal the section of color riband and light textile braid
4 Knife : knife are made of imported high quality rolled steel,with long using life
5 Automatic operation: It works automatically only by setting length and quantity
6 Automatic stopper: It stops automatically only by setting length and quantity.
7 Memory: Set-length,set-q'ty & set-speed are not erased even if power off & on
8 Save document: can save 9 documents,reduce setting time,if it's covenivent to take and operate
suitable for cutting roll materials:such as BOPP, foam tape, masking tape, duct tape,double sided tape,cloth tape,industrial tape, protection film, roll papers etc.
1. Main driving system: AC motor with inverter is employed.
2. Operating panel: All functions are operated on the 10" LCD touch panel.
3. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
4. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor.
The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
5. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
6. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (The angle change range is ±8°).
7. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc