Automatic tape cutting machine --- Working principle
The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving.
The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting.
1. Introduction for Automatic adhesive tape cutting machine
1.1 Application: Bopp Tape, PVC Tape, Double Side Tape, Film and Paper
1.2 Working Width: 1.3m, 1.6m
1.3 Shafts Design: Single shaft, double shafts, four shafts etc.
1.4 Configuration: PLC control with Servo Motor
suitable for cutting roll materials:such as BOPP, foam tape, masking tape, duct tape,double sided tape,cloth tape,industrial tape, protection film, roll papers etc.
1. Main driving system: AC motor with inverter is employed.
2. Operating panel: All functions are operated on the 10" LCD touch panel.
3. Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
4. Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor.
The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
5. Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
6. Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (The angle change range is ±8°).
7. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc