Winding Slitter Rewinder

Winding Slitter Rewinder

Maintenance of the winder
1. The transmission of the toilet paper rewinder, such as the gear chain, needs to be added with butter.
2. The rewinding machine generally does not have problems. The consumable parts are nothing more than small pinions. If one is added, the printing knife is easy to break. The wool roller will become thinner after one and a half years of loading, and it needs to be transported back to the factory for renovation. If the embossing pattern needs to be replaced in the steel roll embossing device, it is necessary to transport the steel roll back to the original factory for modification, and it will not cost much.
3. Pay attention to the voltage of the winder should be stable, otherwise it is easy to burn the motor; pay attention to hygiene, do not let the debris fall between the steel roller and the roller.

Winding Slitter Rewinder

Four release and one rewinding machine operation program ---

Fourth, normal shutdown and emergency stop
1. The emergency stop is faster than the normal stop speed. After the stop, the traction roller is automatically raised. The self-locking button is urgently deactivated. In the state of emergency stop, the machine cannot be started. We need to unlock the emergency stop before the machine can be started. . When the machine does not start (observe whether the start indicator is lit), we check the status of each emergency stop button.
2. When the discharge roller is about to release the material, it must be decelerated in advance. It is guaranteed that the speed of the material is just zero when it is finished.
3. Deflating Adhere the material on the receiving roller with tape, open the pressing shaft, lift the receiving roller, place it on a stable place, deflate the receiving roller, and pull out the receiving roller.

Winding Slitter Rewinder

Four release and one rewinding machine operation program ---

Fifth, sorting out
1. After the work is finished, turn off the power and put the main power switch down.
2. Clean up the work area.

Maintenance matters:
1. It is necessary to add oil to the bearings.
2. Use a manual grease gun to add butter to the bearing of the belt shaft once every six months; when the gear is missing butter, pay attention to add butter.

Precautions: 
1. The winder has certain dangers, so it is necessary to pay attention to safety during operation.
2. Never touch the ultrasonic probe on the pressure roller.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com