Tape Jumbo Roll

Tape Jumbo Roll

Rewinding Machine Structure - Longitudinal Section
In the mechanical system of the winder, the slitting mechanism is a very important part of the winder. In order to ensure a straight and smooth cutting edge, the quality control of the finished paper roll plays an important role in ensuring the volume. It is easy and can reduce the fluffing during printing.
The slitting mechanism should be installed as close as possible to the paper roll so that it can produce a lateral movement more than necessary during the process of cutting the web without curling.

Tape Jumbo Roll

Guolian High Speed ??Slitting Rewinder Technical Description ---

The specific technical structure is described as follows:

3. Double curved roller section:
Mainly composed of bracket, double arc roller, worm gear adjustment device, angle gear, air motor and other devices
        After cutting the paper, it enters a set of curved roller stretching assembly, which is mainly composed of two curved rollers and an adjusting mechanism. The adjusting mechanism is driven by a pneumatic motor, and through a set of angular gear mechanism and two sets of worm gear reduction mechanisms, according to The wrap angle between the web and the curved roller needs to be adjusted at any time. The curved roller is introduced from abroad to ensure its performance. This system effectively stretches the web, eliminates wrinkles, and separates the paper rolls.
4. Automatic paper feeding department:
The guiding paper-feeding roller and the compressed air and the guiding plate are adopted, so that the paper head can smoothly and quickly and accurately complete the paper-feeding action on the uniform air cushion generated by the guiding plate and the compressed air, and between the two bottom rollers is used between the conveyor belt and the bottom roller. Friction drive, so that the paper head is close to the surface of the bottom roller, and the paper-feeding action is completed under the action of compressed air.

Tape Jumbo Roll

Automatic rewinding machine speed ratio adjustment method ---


        The rewinding machine is the first station of the production line equipment of the welcoming machine. The good running condition of the rewinding machine directly affects the quality and production efficiency of the post-processing welcoming paper. The rewinding machine should be able to operate normally and in a good production state. In addition to the good and non-damage of the components, the reasonable adjustment and control of the transmission ratio of the whole machine is very important.
        When the rewinding machine is produced, the original paper web is conveyed by five transmission rollers and belts, that is, a paper feeding belt, a curved roller, a rear platen roller, a front platen roller, a winding roller, and the like. Each of the base papers is thin, the elongation is limited, and the transmission speed ratio is unstable, and the paper web is easy to wrinkle and be broken during the continuous acceleration and deceleration operation of the winder. Reasonable adjustment and control of the speed of each drive roller and paper feed belt can greatly reduce the phenomenon that the paper web is broken. After many daily adjustments, the author summarizes the following key adjustment methods. 1. Stable paper feed belt conveys the line speed of the original paper web. The paper feeding belt of the rewinding machine is driven by the V-belt through the stepless speed-regulating wheel. When the output torque is large, the driving V-belt is close to the outer edge of the speed-regulating wheel, and the transmission speed will be more stable. In order to achieve such a stable transmission effect, the speed ratio of the main gearbox can be adjusted step by step to make the speed of the winding roller slower, and at the same time adjust the speed control handwheels of the paper feed belt of the original paper frame, so that the three sets of transmission triangle belts are in The outer edge of the stepless speed regulation wheel is in a reasonable position until the winding speed of the winding roller and the paper feeding belt are the same.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com