Double Sided Tapes Rewinder Machine

Double Sided Tapes Rewinder Machine

Rewinding Machine Structure - Roll Paper Department:
1. Stretching device
2. support roller
3. unloader
4. transmission mechanism

Double Sided Tapes Rewinder Machine

Rewinding Machine common fault - Paper roll end faces are not aligned
1. Top core movement - Check the top core plane bearing and lock nut and adjust the clearance.
2. The top core force is not enough - check the air motor.

 

Double Sided Tapes Rewinder Machine

Rewinding Machine safety operation guide - 

Fourth, joint operator joint quality:

Joint quality control
1 tape should not be exposed; prevent sticking between sheets.
2 The outer sheet of the joint must be flattened, straightened without wrinkles, and the end surface is not protruding.
3 When the joint is cut, the paper edge shall not be larger than 5mm and neat.
4 The outer tape of the joint must be a straight line.
5 connector label placed at the joint
6 The number of joints should be less than the specified value.