Pvc Film Rewinding Machine

Pvc Film Rewinding Machine

Rewinding Machine Structure - Pressure Mechanism
1, the platen roller
First, in the rewinder system, the platen roller has a significant impact on the tightness control of the paper roll. Among them, the pressure adjusting mechanism plays a role of keeping the pressure of the paper roll and the supporting roll nip constant, and the main purpose is to prevent the paper roll from slipping or being wound too tight at the beginning of the work.
The paper roll is slippery because the paper roll is too light and the take-up is too tight because the pressure is too high until the rewinding to the late stage. In the modern rewinder system, the platen roller is automatically controlled so that additional weight can be applied to the paper web. The force.
2. Hydraulic (air pressure) suspension mechanism
Under normal circumstances, the adjustable pressure actuators use hydraulic suspension scale mechanism. We install a potentiometer attached to the platen roller to display the diameter of the finished paper roll, which is sent through the potentiometer. The signal is passed to the pressure program control unit,
To calculate the pressure, so that the oil pressure in the scale can be changed, thus achieving the pressure control of the platen roller.

Pvc Film Rewinding Machine

Design and application of constant tension and load distribution control for winder---

2Rewinder control research status at home and abroad
Rewinding machine is an important papermaking machine. It is usually installed behind the paper machine. Its speed should be 2-3 times of the speed of the paper machine, generally 1500-1800m/min, up to 300om/min. When threading, run at a maximum speed of 1:100. In order to ensure continuous paper and loose paper during the rewinding process, the tension of the paper web must be kept constant; in order to ensure the tight and loose quality inside the finished paper, the load distribution of the front and rear bottom roller motors must be performed. Therefore, the main performance requirements of the rewinder for the electric drive system are long-term linear speed, adjustable speed and wide speed range, and fast response.
The control of the early rewinder is mainly based on DC drive, and the DC control system is composed of discrete components or analog regulators to realize the above control functions. Since the transmission of analog signals requires a one-to-one physical connection, the signal changes slowly, which increases the overhead of computer speed and accuracy, and the anti-interference ability of signal transmission is poor, and paper breakage and wrinkling often occur in the production process. So in the mid-to-late 1980s, the analog regulator was replaced by a digital regulator, and the DC digital control system of the winder appeared. This control system is more stable, reliable and suitable for maintenance than the analog system, and is more suitable for interface with the factory computer. In the mid-1990s, most of the newly-invested rewinders in the domestic paper industry used all-digital DC-speed converters produced abroad, and the more famous ones were the 6RA7O series from Siemens and the 590 series DC-speed converters from Continental Transmission.
Due to the DC motor commutator and the brush, under the stable conditions, the design speed of the winder can only reach 1800m/mni, and the accuracy of the digital regulator is still limited to about 0.08% of the maximum speed, which can not meet the high speed paper. The matching requirements of the machine (the speed of the winder should be 2-3 times the speed of the paper machine). In the early 1980s, European and Japanese developed AC variable frequency speed control devices. This technology was successfully introduced to the United States in the mid-1980s and used in rewinders. The biggest advantage of the AC drive is that the AC motor is simple in construction and reliable in operation, and it requires much less maintenance and repair than DC motors.
 

Pvc Film Rewinding Machine

Belt rewinding machine design and working principle ---

8 core filling
The core loading device supplies a paper core between the take-up rolls.
Construction
A fork-like paper core loader is mounted on the paper feed roller. The core loader includes a paper core clip and a centering tray. The core loader is hydraulically operated. The movement of the paper core clamp is operated by compressed air.
working principle 
The core is placed on a tray in the core loader. It is fixed in position by the paper core clamp.
During the rewinding process, the core loader opens and the new core is advanced. When the core loader is full, the paper core clamp will run to grip the paper core. The core loader moves to the position it should wait when the paper feed roller moves. When the paper advance roller reaches the position where the paper roll is ejected, the core loader is lowered to the drop position. The core holder is opened and the core falls into the middle of the roll.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com