Masking Tape Double Side Sticker Tape Rewinder Rewinding Machine

Masking Tape Double Side Sticker Tape Rewinder Rewinding Machine

Rewinding Machine Structure - Control Performance Indicators
The rewinder is the last process in the papermaking process. The performance of the rewinder determines the quality of the finished paper roll. A complete rewinder must have the following properties:
1. Adjusting mechanism of pressure of the platen roller
2, support roller torque program control
3. Tension adjustment mechanism
4. Electric drive "flexible" start and proper speed program control.

Masking Tape Double Side Sticker Tape Rewinder Rewinding Machine

Rewinder mechanical structure and control process ---

 

Second, the main structure of the winder
2.1 Ejection Department
In the rewinder system, we installed the paper roll on the paper exit frame. In order to ensure that the width of the sides of the paper web is the same, we should be moving the seasoning when the paper roll is ejected. However, the paper roll in the new structure can be moved together with the paper exit frame, which ensures greater rigidity of the paper exit frame. In addition to manually moving the paper roll, we can also use the pneumatic, photoelectric device and electric method to adjust the axial movement of the paper exit frame, so that the cutting edge of the winder can be narrowed, and the manual adjustment can not be achieved. Requirements.
We have a coupling on the reel of the unwinding roll. When working, we can use a pneumatic device to connect the brake to the motor. We can know that when the high-speed winder is started, the required acceleration time from zero to 2000m/min can be completed within 50~60s, and the deceleration time required for braking is 40s. Or even shorter, so we need to consider the maximum diameter and the maximum braking speed of the paper-removing brake on the winder to reduce the paper loss of the paper-cut, or it will cause a lot of waste. In the selection of the brakes of the eject roll, we often use brakes for starting brakes, magnetic brakes and mechanical brakes. In the usual case, we use the combination of the brake motor and other brake devices. When we press the paper, the paper roll started by the DC motor can enter the acceleration and working state and can be operated by the braking of the DC motor. Control, the tension control of the paper web, in the case of emergency stop, we can use the DC motor and other brakes together to stop the paper roll at the fastest speed.

Masking Tape Double Side Sticker Tape Rewinder Rewinding Machine

Rewinder mechanical structure and control process ---

Third, the rewinding machine control performance indicators
The rewinder is the last process in the papermaking process. The performance of the rewinder determines the quality of the finished paper roll. A complete rewinder must have the following properties:

3. Tension adjustment mechanism
It is generally believed that web tension control is one of the important factors affecting the tightness of the paper roll. The most important function of flattening the paper web during the rewinding process is the web tension, and the web tension must be kept stable before the paper can be avoided. The lateral movement of the web allows the rolled out finished paper roll to meet the requirements. However, the web tension is only affected when the finished paper roll is rolled up. Since we are using a double bottom roller lower paper rewinding machine, the paper web must pass through the back bottom roller to be wound on the paper roll. The roller will isolate most of the tension, and only a small amount of tension can be transferred to the finished paper roll, which means that if there is tension to control the hardness of the paper roll, if the hardness of the paper roll changes little, The tension will change a lot. The key factors affecting the hardness of the paper roll are the pressure of the platen roller and the torque difference between the front and rear bottom rollers. The effect of the web tension on the hardness of the paper roll is not great because it is not a critical factor. 4. Electric drive "flexible" start and proper speed program control The starting of the winder is of course smoother and better, so that the paper web can be prevented from being subjected to the impact of tension, and the breakage can be reduced and the paper roll can be improved. Rewind quality. In order to meet such requirements, we often add a given integrator to the speed and current of the speed regulation system. This is beneficial to the start of the winder. Through analysis, we can know that if the system is to start more smoothly, give The larger the time constant of the integrator, the better, so the integral time constant of a given integrator can be adjusted over a large range to suit the processing requirements.
From the above four points, we can see that the electronic control system must have adjustment skills to meet the rewinding process.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com