Butyl Tape

Butyl Tape

Rewinding Machine common fault - Rolls are not collected
1. The original coil is not uniform - Finish the original coil to ensure that the original coil is neat
2, paper core size head - check the paper core
3, only start a short period of time - normal phenomenon,
4, bearing damage - bearing damage is often accompanied by abnormal noise, pay attention to check the bearing, found that the damage is replaced in time
5, shaft damage - contact the manufacturer

Butyl Tape

Design and application of constant tension and load distribution control for winder---

1. Rewinder structure and working principle
The rewinder is a paper roll produced by a paper machine, which is slit, finished, and re-rolled into a roll paper or other type of paper with a certain width and length and tightness to meet the printing memory package. Industrial needs. The performance of the rewinding machine will affect the output of the entire paper machine production line.
The rewinding machine has many forms. According to the nature of the reel, the rewinding machine can be divided into a shaft rewinding machine and a shaftless rewinding machine: according to different rotation modes, it can be divided into single motor transmission and double motor rotation. In this paper, we are transforming a double-bottom roll-feeding rewinding machine, each of which has its own motor drive.

Butyl Tape

Belt rewinding machine design and working principle ---

2 rear bottom roller
The roller is covered with a steel shell. It maintains a dynamic balance at a speed equivalent to the design speed. The roller has a coating and a spiral groove. Equipped with hydraulic brake system. The roll outer coating is used to attempt to increase the friction between the roll surface and the paper during rewinding. Air is discharged along the spiral groove between the roll surface and the paper roll.
Vacuum drum
The rear bottom roller has a hole. Vacuum suction is generated by a blower. This facilitates paper machine threading to ensure that the cut sheet fits snugly against the roll during roll change.
(traction) platen roller device:
1-cylinder safety valve
2- Pressing roller
3- Press roller safety lock
4- Photocell
5- Pressing roller beam
6- Paper roll
The platen roller is used to hold the paper roll during the roll paper process. The pressure between the roller and the drum is adjusted by adjusting the pressure of the platen roller. The rewinding pressure affects the roll density and sheet tightness and winding force. In addition, the platen roller ensures that the paper roll is in an adapted position.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?