Rewinding Machine safety operation guide -
Third, the rewinding machine opening and closing operation sequence:
2. When the paper roll reaches the specified rewinding diameter (meters), the working speed will slowly drop.
After the paper roll reaches the specified diameter (meters), press the “stop” switch. After the quality inspector has measured the paper roll and the appearance quality, tape the outermost piece of paper with a tape and stick the paper. The inner core of the core barrel is pulled out (the thimble) and the bottom knife roll is lifted to remove the paper roll.
3, the rewinding machine should have a long downtime, stop the paper side fan, and do a good job of surrounding sanitation.
Rewinding Machine operation safety regulations -
First, the preparation work before starting
1. Clean up the dust on the machine;
2. Check the circuit of the machine (whether the circuit is damaged), whether the rotating parts (bearings, gears, etc.) are loose, whether the conveying belt is intact, whether the protective device is intact, if there is an abnormality, it needs to be replaced or reported to the workshop supervisor in time;
3. Is the amount of lubricating oil (butter, oil) of the rotating parts of the machine appropriate? Is the amount of white mineral oil on the perforating knife appropriate? If not enough, add the right amount of oil;
Guolian High Speed ??Slitting Rewinder Technical Description ---
The rewinder has the characteristics of high automation, fast speed, stable operation and wide width.
First, the main technical parameters:
Paper type: high strength corrugated paper
Net paper width 4950mm
Working speed 2000m/min
Design speed 2200m/min
Feed speed ≤25m/min
The maximum diameter of the eject roller φ3100mm
Roller roller maximum diameter φ1500mm
Roller roll minimum diameter φ500 mm
Maximum web tension 1500N/m Acceleration time 90s Emergency stop time 25s
Arrangement Right hand (retract the paper from the paper exit, the drive is on the right)
Dynamic balance level G1.6
Paper core 3”
Color to be determined
The rewinder is mainly composed of a mechanical part, a hydraulic and pneumatic part, an electric control part and the like.
The specific technical structure is described as follows:
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc