Rewinding Machine safety operation guide -
Fourth, joint operator joint quality:
1 found that the paper has a broken rewinder
2 peel off the damaged paper that affects the quality at the break of the rewinding and rewinding paper roll, and draw the paper edge Qi.
3 first cut a piece of paper, paste double-sided tape (or according to process requirements)
4 Stick the other side of the paper together, cut the paper, and attach the connector label.
Rewinding Machine operation safety regulations -
Second, the operation steps：
1. According to the production order of the day, the squad leader is responsible for arranging the material production (base paper, packaging materials, paper core);
2. Check whether the quality of the original paper texture, color, tension, elongation and other products meet the product requirements.
3. Put the original paper on the paper-removing shaft and the shaft plug must be locked. The 1575 rewinding machine is assisted by the handyman to push the original paper to the unloading frame and push it into the positioning slot. The 2900 rewinding machine uses the cylinder to lift the paper. Push the rear frame into the positioning groove of the rear frame (when the iron shaft is pushed into the positioning groove, pay attention to safety), and adjust the left and right position. When replacing the base paper, the shaft stalk and the plug must be removed with both hands and placed on the ground. It is strictly forbidden to throw or fall on the ground, and damage the floor or hurt the person;
Rewinder mechanical structure and control process ---
As the last process in the papermaking industry, the winder is the fastest running machinery in papermaking machinery. Its speed can reach 1500~1800m/min or even the speed can reach 3000m/min or more. The winder is in the papermaking industry. The important role that can not be ignored, the paper roll from the paper machine must be rewinded by the winder to get the finished paper roll we need, and the quality of the finished paper roll is not only determined by the paper machine, The role of the winder is also of particular importance.
The working principle of the winder is to install the large paper roll produced from the paper machine on the paper exit frame of the winder. In order to maintain a certain tension of the paper web, the brake device must be installed on the paper return frame. A brake motor is installed on the paper exit frame. If the paper breaks during the rewinding process, the brake device can also brake quickly to reduce paper loss. The web is cut to the width we need by the slitting roller, the paper guide roller and the winder slitting mechanism, and then re-rolled into a paper roll according to the required tightness and the diameter of the finished paper roll. The main structural parameters of the winder are the width of the paper roll that can be rewinded, the maximum speed that the rewinding machine can reach, the quality of the finished paper roll, the maximum diameter of the ejecting roll and the roll paper, and the method of cutting the paper.
There are many types of rewinders, and other devices can be equipped in the rewinder as needed to become a joint machine. The rewinder can basically be divided into the following five types: upper paper rewinder, lower paper rewinder, single roll rewinder, special rewinder and thin paper rewinder. Since the research object of this subject is mainly for the lower threading rewinding machine, the introduction and explanation of the double bottom roller lowering paper rewinding machine will be given.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc