Rewinding Machine safety operation guide -
Fourth, joint operator joint quality:
1 found that the paper has a broken rewinder
2 peel off the damaged paper that affects the quality at the break of the rewinding and rewinding paper roll, and draw the paper edge Qi.
3 first cut a piece of paper, paste double-sided tape (or according to process requirements)
4 Stick the other side of the paper together, cut the paper, and attach the connector label.
Guolian High Speed ??Slitting Rewinder Technical Description ---
Second, the system configuration
1. Main transmission part: 1 set of paper-removing brake generator, 400kW (YVP4501-6 or
1LA8357-6), one roller motor (YVP225S-4), 37kW, two pressure roller motors (YVP132S-4), 5.5kW, two coiling motors (YVP355L2-4) (one for each front and rear roller) , 315kW, 6 paper cutter motor, 0.55kW, total installed capacity 1082kw (model and power are subject to final design). The rectification feedback and the inverter unit and the tension controller matched with the above constitute a transmission control system.
2. Logic control part: PLC host 1 block.
3. The logic control system selects the S7-400 series products of SIEMENS.
4. Tension control part: 1 set of tension detection and control system, using Sweden
5. 1 set of coiling roller pressure detection and control system.
6. The diameter detecting sensor of the take-up roller.
7, with position detection, pressure detection, liquid level detection, safety detection sensor and phase
The control agency should be controlled.
8. On-site operation panel, logic control panel, and electric drive panel.
Belt rewinding machine design and working principle ---
8 core filling
The core loading device supplies a paper core between the take-up rolls.
A fork-like paper core loader is mounted on the paper feed roller. The core loader includes a paper core clip and a centering tray. The core loader is hydraulically operated. The movement of the paper core clamp is operated by compressed air.
The core is placed on a tray in the core loader. It is fixed in position by the paper core clamp.
During the rewinding process, the core loader opens and the new core is advanced. When the core loader is full, the paper core clamp will run to grip the paper core. The core loader moves to the position it should wait when the paper feed roller moves. When the paper advance roller reaches the position where the paper roll is ejected, the core loader is lowered to the drop position. The core holder is opened and the core falls into the middle of the roll.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc