Tape In Hair Extensions Human

Tape In Hair Extensions Human

Rewinding Machine safety operation guide - 

Fifth, the tool change operation:
1. The bottom knife replacement is handled by the mechanic.
2. The rewinding machine must be stopped when the upper round knife is replaced.
3. After removing the round blade, replace the new blade and fix it.
4. Install the round knife seat, adjust the angle, and lower the round knife to make it close to the bottom knife.
5, running, paper test knife, paper edge is not, smooth.
6. The tightness and depth of the blade and the bottom knife should be controlled properly, not too tight, otherwise the new knife
The film will roll the knife; it should not be too loose, otherwise it will jump the knife and the hair; not too deep, otherwise it will cause double trimming; too shallow will jump the knife.

Tape In Hair Extensions Human

What is a fully automatic winder---
The shortage of workers and the lack of employment are the actual problems faced by enterprises in the current period. In addition to the fierce competition in the current market price war and other factors, it is undoubtedly worse for enterprises. Transforming and upgrading equipment is fundamental to reducing costs today. For the needs of the market, our Zhengzhou Guolian Machinery Factory is in a hurry to develop the plastic machinery supporting equipment ------- automatic rewinding machine.

Automatic rewinding machine - role and purpose
Instead of the previous manual and manual semi-automatic secondary rewinding. It effectively improves work efficiency, reduces and saves the problem of labor and workers' wages, and is a fully automated production supporting equipment that is indispensable for enterprises to directly reduce production costs.

Automatic rewinding machine---function and use
In order to meet the different needs of customers for the length and width of the product. Carrying on cling film, wrapping film, stretching
Secondary rewinding of film, aluminized film, paper, non-woven fabric, etc. Replacing previous manual operations and manual semi-automated work. Improve the cumbersome and heavy work procedures and manual labor and the lack of labor and reduce unnecessary expenses, improve work efficiency, and thus achieve the purpose of reducing production costs.

Tape In Hair Extensions Human

Design and application of constant tension and load distribution control for winder---

3 limitations of the original control system
This paper is aimed at the transformation of the rewinder analog DC drive system. The original rewinder control system mainly has the following shortcomings and limitations:
(1) The original rewinder control system is the DC drive control system of Siemens AG of Germany. Due to the DC motor drag, the analog regulator is adjusted, the device parameters are easy to drift, resulting in the reliability and accuracy of the rewinder, and Affect the quality and efficiency of rewinding, the maximum speed is only about 600m/min, it is difficult to meet the production requirements of high-speed paper machines.
(2) The original system uses mechanical buttons and instruments to operate and monitor the production process. The information integration capability is not strong. The process parameters of many production processes cannot be obtained, which increases the labor intensity of workers' operations and the time of manual participation in production, which affects the rewinding. Machine utilization and automation.
(3) The original system is a centralized system. A large number of I/O cables are distributed between the control room and the site, which not only increases the cost but also increases the system's unreliability.
(4) Due to incomplete information of field-level equipment, online fault diagnosis, alarm, and recording functions of field-level equipment are not strong. On the other hand, it is difficult to complete the parameterization functions such as remote parameter setting and modification of field devices, which affects the maintainability of the system.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com