Rewinding Machine safety operation guide -
Seventh, production operations and quality control during the rewinding process:
1. The speed must be slow when rewinding, and the inspector should check the appearance quality of the paper.
2, often check the quality of the paper, found that the paper disease stopped in time, to the inspector on duty
Report and contact the upper and lower processes to strip off paper with quality problems. The rewinding can be continued after the inspector confirms.
3. When rewinding, pay attention to the situation of broken ends, trimming, etc., and control the tension of the paper during rewinding.
The car is tight) to keep the inner and outer tension of the paper roll consistent.
Rewinding Machine operating procedures -
First, the boot process:
1. Turn on the total power of the rewinder and the power of the detection system in turn; Note: (1) Before turning on the power, please make sure that the circuit is connected correctly and there is no short circuit;
(2) When the main power is turned on, an alarm will occur. After about 5 seconds, after resetting through the touch screen, turn on the detection power.
2. Turn on the air source switch, please ensure that the air pressure is around 6Mpa;
3. According to the paper-feeding direction in the machine state of the touch screen, the product is paper-punched; Note: (1) Please select the paper-feeding state before putting on paper;
(2) Ensure that the core is in the middle position of the inflation shaft, and the core is installed on the left and right gas rise shaft
The same location;
Rewinder mechanical structure and control process ---
This chapter mainly introduces the mechanical structure of the double-backed roller rewinding machine, the working principle of the rewinding machine, the quality index and control performance index of the finished paper roll, and mainly analyzes the process of the rewinding machine from non-electrical convenience. Through the introduction of the quality index and control performance indicators of the finished paper roll, we can clearly understand that in order to optimize the quality of the paper roll, we understand the control system control objectives. Detailed analysis from the mechanism of operation: automatic program control of platen roller pressure; automatic program control of support roller torque; automatic tension control; electric drive "flexible" start and appropriate speed program control .
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc