Drip Tape

Drip Tape

Rewinding Machine safety operation guide - 

Seventh, production operations and quality control during the rewinding process:
1. The speed must be slow when rewinding, and the inspector should check the appearance quality of the paper.
2, often check the quality of the paper, found that the paper disease stopped in time, to the inspector on duty
Report and contact the upper and lower processes to strip off paper with quality problems. The rewinding can be continued after the inspector confirms.
3. When rewinding, pay attention to the situation of broken ends, trimming, etc., and control the tension of the paper during rewinding.
The car is tight) to keep the inner and outer tension of the paper roll consistent.

Drip Tape

Rewinding Machine operating procedures - 

Two: shutdown process:
1. Click the “Stop Detection” button and use the ICW program “Shutdown”;
2. Turn off the detection system switch;
3. Turn off the total power switch of the winder;
4. Close the total air valve.

Drip Tape

Rewinder mechanical structure and control process ---


Second, the main structure of the winder

2.4 Pressure mechanism
1, the platen roller
First, in the rewinder system, the platen roller has a significant impact on the tightness control of the paper roll. Among them, the pressure adjusting mechanism plays a role of keeping the pressure of the paper roll and the supporting roll nip constant, and the main purpose is to prevent the paper roll from slipping or being wound too tight at the beginning of the work. The paper roll slips because the paper roll is too light, and the winding is too tight because the pressure is too high until the rewinding to the later stage. In the modern rewinder system, the platen roller is automatically controlled, so that the paper can be additionally applied. The force.
2. Hydraulic (air pressure) suspension mechanism
Under normal circumstances, the adjustable pressure actuators use hydraulic suspension scale mechanism. We install a potentiometer attached to the platen roller to display the diameter of the finished paper roll, which is sent through the potentiometer. The signal is transmitted to the pressure program control unit to calculate the pressure, so that the oil pressure in the suspension scale can be changed, thereby achieving pressure control of the platen roller.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?