Stationery Tape Slitting And Rewinding Machine

Stationery Tape Slitting And Rewinding Machine

Maintenance and maintenance of the slitter:
     Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.

Stationery Tape Slitting And Rewinding Machine

Slitting machine operation guide ---

4 operational requirements

4.2 Slitting

4.2.6 The customer is the product of Xiamen Cigarette Factory, and the length of the reel is cut. The weight of the reel label is filled in the theoretical weight of each product (see the attached table for the theoretical weight of each product). After the self-inspection is passed, the scale needs to be scaled one by one. The weight of the product is kept rounded to two digits after the decimal point. The weight of the product registered in the certificate and machine record table should be consistent, and the record should be true and accurate.
4.2.7 The products that have passed the self-test and the internal and external labels are neatly stacked on the tray. The number of products stacked on each tray and each tray is specified in the “Product Printing Process Card” and fixed with a cannula.
4.2.8 If the product does not meet the quality requirements, it needs to be removed or the product quality is in doubt. It is necessary to carry out re-inspection and strictly follow the “Rewinding Machine Operation Guide”.
4.2.9 Timely labeling and isolating materials, products, and materials to be processed at the production site, and taking the squad leader in charge of process identification and traceability operation control and integrated management according to the “identification and traceability control procedures”. After each shift is completed, the production report should be taken to the monitor.
4.2.10 If the product to be treated has not been processed within 2 working days, it should be reported to the workshop with the squad leader for timely disposal.
4.2.11 When the cutting machine is changed, it must be strictly in accordance with the “Regulations on the Management of Shop Closing”.

Stationery Tape Slitting And Rewinding Machine

Slitting machine operation guide ---

6 Safety Precautions
6.1 The operator must be trained to work and wear the labor protection products correctly; carefully check the protective devices, safety interlocks, test buttons, emergency buttons, etc. of the machine before starting the machine, and confirm that the machine can be turned on after normal operation.
6.2 The slitting machine is a double-operated equipment. It is forbidden to operate in tandem, especially when the equipment is repaired.
6.3 The cut products should be stacked neatly and securely, and fixed with a cannula to prevent the product from slipping and hurting people.
6.4 When working, it is not allowed to place any irrelevant items such as oil pots and tools on the workbench.
6.5 During the operation of the machine, it is strictly forbidden to reach into the circumference of the slitting knife or the pressure roller. Even if the vehicle has been stopped but the power is not disconnected, it is forbidden to perform the tool change, paper adjustment and adjustment under the knife.
6.6 Slitting blades must be protected during handling and storage, and must not be handled or stored with bare edges.
6.7 The interlocking protection devices of all parts of the equipment shall not be short-circuited or removed, and if malfunction or abnormality occurs, stop immediately and report to the machine for repair and maintenance.
6.8 Machine personnel shall not perform fault repair or equipment adjustment of fault type, and the power distribution cabinet, switch box, etc. shall not be opened without authorization, and shall not store items.
6.9 When handing over the shift, you must hand over the site, and you must explain the production and equipment operation of the class to the next one.
6.10 Check the surrounding conditions before leaving work, and cut off the power and air supply of the machine and related equipment.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com