Maintenance and maintenance of the slitter:
Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.
Slitting machine operation guide ---
7 Equipment maintenance
7.1 Daily Insurance Project:
A The main part (including safety protection) should be inspected before work (shift or interruption).
B Press the lubrication diagram of the machine and refuel before working.
C A cleaning job should be performed and the tools should be placed in place before the end of each shift.
7.2 The contents of the weekly insurance shall be implemented in accordance with the relevant provisions of the “Device Two Guarantee Record”.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
In the modern packaging industry, the slitting machine is a relatively important equipment that is often used before and after printing. The raw materials are mainly cut before printing, such as paper, plastic film and so on. This is a process that raw material manufacturers must complete in order to meet the width requirements of packaging manufacturers such as customers. The slitting machine is used to divide the printing and composite film of a plurality of sets of patterns of a fixed width into a finished film roll to adapt to the subsequent automatic packaging and bag making process.
With the improvement of flexible packaging automation and consumer goods manufacturers focusing on reducing the inefficiency and pollution of intermediate links, some manufacturers have gradually changed the process and replaced manual packaging with more automated automatic packaging lines. As the demand for coils continues to increase, the position of the slitter is becoming more and more important, and higher requirements are placed on the efficiency of the slitter.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc