Maintenance and maintenance of the slitter:
Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
When it comes to the efficiency of the slitter, many people think that the efficiency of the slitter is only related to the speed of the slitter. Actually, I think that the efficiency of the slitter is related to the following factors: slitting speed, finished product. Rate, non-operation time, stability, etc. Although the cutting speed is an important indicator of the working efficiency of the slitting machine, if the yield is low, not only will the work efficiency of the whole machine be low, but also the cost will increase. Similarly, if the non-operation takes a long time, such as: adjusting the machine, setting the tool, changing the tool, refueling, connecting the joint, changing the volume, processing the problem, etc., it takes a long time to improve the speed of the slitter, and it makes no sense. It is. Not to mention the stability of the slitting machine, not only will it affect the working efficiency of the slitting machine, but also affect the quality of the product, and it will cause trouble and unnecessary waste to the next process. Therefore, the efficiency of the slitter is a comprehensive concept.
Domestic cutting machine development status and outlets ---
1. Not rigorous in the manufacturing process
Tolerance control in the mechanical manufacturing process is not precise enough, and the surface is rough, especially in the matching electroplating industry, which is shoddy. There is a defect in the dynamic balance of the roller for cutting the Chinese-made equipment at one time. The lag of the related industry, the rubber coated by the roller has far less wear resistance and anti-aging than the foreign products. The bearings used seem to use well-known foreign brands, but the counterfeit and shoddy floods the domestic bearing market. Even when the real goods are purchased, the precision is far lower than the precision used by foreign slitting machines.
In the entire production process of a slitting machine, there is no guarantee of production process. At present, most of the slitting machines produced in China are completed by a number of outsourcing units, and the quality of their production is even more difficult to guarantee. In addition, the metal materials used and the heat treatment process are not rigorous enough, resulting in many problems in the use of a slitting machine. It has seriously affected the share of a slitting machine in the domestic market. The secondary and tertiary slitting machines have fewer problems than the one slitting machine, because the parts of the secondary and tertiary slitting machines are completed by the slitting machine manufacturer, and the dynamic balancing machine used is in a narrow range. It can accurately control the unbalanced grams, and the industrial difficulty coefficient of manufacturing is reduced. Its selling price is far lower than that of foreign products. Therefore, the proportion of domestically produced slitting machines in the domestic slitting machine market getting bigger.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc