Slitting machine use：
Applicable to BOPP / PVC / PE / textured paper / imported high-end double-sided tape / kraft paper tape / conductive foam plastic / cloth / industrial tape / protective film and other cutting.
Domestic cutting machine development status and outlets ---
three. Domestic slitting machine development direction
The development direction of domestic slitting machines should be considered from three aspects:
1. Frame structure: Whether it is a slitting or a second or third slitting, domestic slitting machine manufacturers should invest their energy and study on the frame structure, and actually design a more reasonable slitting machine to get rid of the cutting machine manufacturers. At present, the plagiarism of the slitting machine produced, the research and design of a personalized slitting machine, making the different materials in the structure more detailed, in the next round of international market competition, to provide a favorable weapon for film-making enterprises, At the same time, I also find out the blue ocean for my own company.
Slitting machine parts ---
2. Attenuation and tension compensation of the tension of the rewinding and unwinding: It is generally believed that maintaining the constant tension of the aluminum foil during the rewinding and unwinding of the aluminum foil is beneficial to the apparent quality of the finished aluminum foil, but it is not. The best method is to increase the tension of the aluminum foil according to a certain rule as the diameter of the coil increases, and the smaller the diameter, the lower the tension value. There are automatic tension control and manual tension control during the slitting operation. The automatic tension control system is the leading set tension attenuation value, which is maintained throughout the winding process. The manual tension control requires the operator to continuously adjust the diameter of the master roll to meet the tension required for the aluminum foil during operation. When setting the automatic tension operation, set the initial tension before setting the tension attenuation value. Taking the setting of the slitting and unwinding attenuation value as an example, the setting principle is that the aluminum foil tension attenuation value (%) is equal to the tension at the end of winding of the aluminum foil minus the initial tension and then divided by the initial tension. Multiply by 100%. When setting the automatic tension value of the unwinding, it should not be too large, otherwise the aluminum foil winding surface has a large hardness and is prone to warping. But the tension should not be too small, too small and easy to cause the rewinding body to be too loose, and the winding is not neatly running. Therefore, the quality of the rewinding and unwinding during the aluminum foil slitting operation is mainly affected by the change of the tension of the aluminum foil. It can be seen that the mastery of the retracting and unwinding control system is the key to affecting the quality.
3. The change of speed during slitting affects the change of tension: When the speed is increased or decelerated, the speed of the main motor changes. Firstly, it causes the instantaneous change of the tension of the unwinding traction to the winding section of the aluminum foil, and it is necessary to slightly vibrate the aluminum foil after a period of time to gradually stabilize the tension. The instability of this tension is manifested in the fact that the finished roll is not well-wound, and the end face has unevenness, which affects the quality of the product.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc