Inspection and preparation before the cutting machine is turned on
4.1.1. Confirm that the main power supply voltage is 380V.
4.1.2. Turn on each power switch and check if the electricity and gas supply are normal.
4.1.3. Before starting the machine, you must confirm that the surface of each guide roller is smooth and free of burr dust, debris, etc. When cleaning the machine, use alcohol or water to soft cloth.
Wipe, can not be wiped with other solvents, remove the impurities around the equipment and production, to ensure normal production;
4.1.4. Obtain all kinds of accessories and tools such as slitting products and tapes in strict accordance with the production instruction sheet and the process card requirements.
18.104.22.168. Receive the composite film specified on the production instruction sheet, check whether the composite film tracking card is complete, and describe the previous quality problem is it clear.
22.214.171.124. Confirm the cut specifications, roll direction, batch number, material structure, winding diameter or meter number according to the production order. 4.1.5. Carefully check the equipment to confirm that each rewinding mechanism, EPC device, and tension control system are normal, and confirm static electricity.
Whether the elimination is normal or not;
4.1.6. The unwinding material is ready, and then the film is routed in the correct way;
4.1.7. Prepare the winding paper core according to the slitting specifications and place it in the corresponding position of the winding reel.
Slitting machine operation guide ---
4 operational requirements
4.2.6 The customer is the product of Xiamen Cigarette Factory, and the length of the reel is cut. The weight of the reel label is filled in the theoretical weight of each product (see the attached table for the theoretical weight of each product). After the self-inspection is passed, the scale needs to be scaled one by one. The weight of the product is kept rounded to two digits after the decimal point. The weight of the product registered in the certificate and machine record table should be consistent, and the record should be true and accurate.
4.2.7 The products that have passed the self-test and the internal and external labels are neatly stacked on the tray. The number of products stacked on each tray and each tray is specified in the “Product Printing Process Card” and fixed with a cannula.
4.2.8 If the product does not meet the quality requirements, it needs to be removed or the product quality is in doubt. It is necessary to carry out re-inspection and strictly follow the “Rewinding Machine Operation Guide”.
4.2.9 Timely labeling and isolating materials, products, and materials to be processed at the production site, and taking the squad leader in charge of process identification and traceability operation control and integrated management according to the “identification and traceability control procedures”. After each shift is completed, the production report should be taken to the monitor.
4.2.10 If the product to be treated has not been processed within 2 working days, it should be reported to the workshop with the squad leader for timely disposal.
4.2.11 When the cutting machine is changed, it must be strictly in accordance with the “Regulations on the Management of Shop Closing”.
Slitting machine operation guide ---
8.1 The cutting personnel shall record the production status in the “production record of the cutting machine” and other related records, insert the product into the “product tracking card”, and fill in the corresponding content in time according to the column and frequency requirements set in the record. The disk customers fill in the theoretical weight of each product for the weight of the product label of the Xiamen Cigarette Factory (see the attached table for the theoretical weight of each product), and the content is complete, clear, true and accurate.
8.2 Records should not be filled in with a pencil. The record holder should sign the quality record and indicate the time the record was filled.
8.3 The records listed in the record (except the remarks column) should be filled in. If the corresponding content is not found or there is no item, it can be recorded by slashing. The operator should write the full name and must not only write the last name.
8.4 Record changes caused by mistakes, etc. shall not exceed three pages per page. The records shall be clearly identifiable after the change. For all kinds of quality records that are validated and validated by the product and system, the change shall be stamped with a proofreading or marked change. people.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc