Opp Plastic Cutter

Opp Plastic Cutter

Preparation of slitter cutter
1. Razor slitting
1.1. The razor slitting requires the film to travel in the correct direction to the winding section.
1.2. Adjust the photoelectric tracking to bring the film to the proper position.
1.3. Tension the film and attach the blade to the razor holder.
1.4. According to the specifications required by the instruction sheet, the sliding razor holder is cut into the razor groove under the film, and the blade edge and the edge of the sipe are required to be in contact with each other.
1.5 After adjusting the depth of the cutter, lock the razor frame screws.
2. Round knife cutting
2.1. Check whether the upper and lower knives are sharp and have no gaps, and vice versa;
2.2. Determine the number of knives (N+1) according to the number of product series (N);
2.3. Install the lower knife to adjust the width of the lower knife according to the actual width of the product;
2.4 Install the upper knife correctly. The flat side of the upper knife is aligned with the side of the lower cutting edge. The upper knife is aligned with the gap between the lower knife and the septum. Press the screws on both sides to make the upper knife enter the gap depth to about 2mm. The upper knife is attached to the lower knife and fastened. Finally, the screw on the left side of the upper knife holder is adjusted so that the whole knife holder moves 1-2 mm to the right side and is fastened.

Opp Plastic Cutter

Slitting machine operation guide ---

5 handling of abnormal conditions
5.1 Once the quality problem is found in the cutting process, it should be stopped immediately and recorded. The products that cannot be processed should be strictly distinguished, and the label should be marked and reported to the workshop to be handled by the monitor.
5.2 If the abnormal cutting process, abnormal smell, high temperature or sudden failure occurs, the machine should stop immediately. The machine personnel should fill in the “equipment failure repair order” and submit it to the squad leader for confirmation. Also recorded in the production record. 5.3 Timely feedback to the squad leader for problems that cannot be dealt with with quality, equipment, materials, and crafts.
5.4 Equipment failure Machine personnel should actively cooperate with the machine repair to debug, and record the equipment failure, the amount of damage, etc. in the "machine failure debugging consumption table", signed and confirmed by the machine personnel, the shift supervisor, and the machine repair class. The number of equipment faults after on-site confirmation is not included in the consumption assessment.
5.5 When the machine is running, it is strictly prohibited to be unattended.

Opp Plastic Cutter

Slitting machine operation guide ---

7 Equipment maintenance
7.1 Daily Insurance Project:
A The main part (including safety protection) should be inspected before work (shift or interruption).
B Press the lubrication diagram of the machine and refuel before working.
C A cleaning job should be performed and the tools should be placed in place before the end of each shift.
7.2 The contents of the weekly insurance shall be implemented in accordance with the relevant provisions of the “Device Two Guarantee Record”.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com