Tape Slitting Machine For Carton

Tape Slitting Machine For Carton

Preparation of slitter cutter
1. Razor slitting
1.1. The razor slitting requires the film to travel in the correct direction to the winding section.
1.2. Adjust the photoelectric tracking to bring the film to the proper position.
1.3. Tension the film and attach the blade to the razor holder.
1.4. According to the specifications required by the instruction sheet, the sliding razor holder is cut into the razor groove under the film, and the blade edge and the edge of the sipe are required to be in contact with each other.
1.5 After adjusting the depth of the cutter, lock the razor frame screws.
2. Round knife cutting
2.1. Check whether the upper and lower knives are sharp and have no gaps, and vice versa;
2.2. Determine the number of knives (N+1) according to the number of product series (N);
2.3. Install the lower knife to adjust the width of the lower knife according to the actual width of the product;
2.4 Install the upper knife correctly. The flat side of the upper knife is aligned with the side of the lower cutting edge. The upper knife is aligned with the gap between the lower knife and the septum. Press the screws on both sides to make the upper knife enter the gap depth to about 2mm. The upper knife is attached to the lower knife and fastened. Finally, the screw on the left side of the upper knife holder is adjusted so that the whole knife holder moves 1-2 mm to the right side and is fastened.

Tape Slitting Machine For Carton

The basic knowledge of the slitting machine and its development process --

Basic knowledge and development of slitting machine

When it comes to the efficiency of the slitter, many people think that the efficiency of the slitter is only related to the speed of the slitter. Actually, I think that the efficiency of the slitter is related to the following factors: slitting speed, finished product. Rate, non-operation time, stability, etc. Although the cutting speed is an important indicator of the working efficiency of the slitting machine, if the yield is low, not only will the work efficiency of the whole machine be low, but also the cost will increase. Similarly, if the non-operation takes a long time, such as: adjusting the machine, setting the tool, changing the tool, refueling, connecting the joint, changing the volume, processing the problem, etc., it takes a long time to improve the speed of the slitter, and it makes no sense. It is. Not to mention the stability of the slitting machine, not only will it affect the working efficiency of the slitting machine, but also affect the quality of the product, and it will cause trouble and unnecessary waste to the next process. Therefore, the efficiency of the slitter is a comprehensive concept.

Tape Slitting Machine For Carton

Domestic cutting machine development status and outlets ---

4. Lack of independent innovation, boldly out of their own characteristics
At present, most of the domestic slitter manufacturers are counterfeit foreign products. Most of them are in the German, Japanese, and Taiwanese styles. Their structures are quite different. What's more, they are copied and copied. Not to mention serious violations of the intellectual property rights of others, there is no driving force for China's slitter manufacturing industry, which will bring China a very unfavorable factor in the next round of international market competition. Everyone knows that plagiarizing others will achieve short-term performance in the market, but in the long run, in addition to inhibiting the development of enterprises, it also has a negative impact on related industries, and also limits the film-making enterprises. Towards international competition. I personally believe that in addition to drawing on foreign advanced technology and experience, we must also focus on self-innovation, give full play to the wisdom of Chinese people, and create first-class cutting equipment at the lowest cost, so that filmmakers can make the next round. In the international competitive environment, it brings a greater competitive advantage.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com