Small Jumbo Roll Slitting Machine

Small Jumbo Roll Slitting Machine

Slitting adjustment
1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop;
2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter should be re-matched.
3. Check whether each of the paper cores and the corresponding film are aligned, otherwise adjust them;

Small Jumbo Roll Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

On the surface, slitting is the process of dividing a film of a width into several equal or unequal width products by a cutter. The slitting process is relatively simple, but often contains mystery in simplicity, in actual production. The slitting operation is a very important part in the production of BOPP film. The quality of the slitting will directly affect the quality level of the film and affect the quality of the user. Therefore, the quality of the slitting must not be underestimated in the film production process. . Only by fully recognizing the importance of the slitting process and fully grasping the basic essentials of slitting, can we minimize consumption and ensure the best product quality, in order to fully meet the needs of customers, and provide the most reliable product quality for BOPP film. Guarantee.

Small Jumbo Roll Slitting Machine

Slitting machine operation guide ---

4 operational requirements

4.2 Slitting
4.2.1 When loading paper, it is necessary to standardize the operation. If there are products that do not meet the quality requirements, the products should be picked out and clearly marked, and feedback should be sent to the squad leader.
4.2.2 Before the official production, the crew must pass the start-up information to each other, and it is not allowed to stack debris that interferes with the operation around the machine. The captain (blocking vehicle) shall compare the trial production sample with the standard proof, and self-check the product size specification. After confirming the pass, sign the first proof, and the sample will be retained until the end of the project.
4.2.3 When cutting, it is necessary to see the product specifications and determine in advance whether the size of the slitting knife meets the product quality requirements.
4.2.4 Each group of products must be self-tested, and the quality requirements and production process control shall be carried out according to the “Product Printing Process Card”.
4.2.5 After each group of products has been cut, the product label is affixed to the self-test and the production record is filled. The products to be re-rolled are processed on the shift; the items to be treated or scrapped are labeled and transferred to the treated area or waste as required. Area. The label of each product must clearly and accurately indicate the current product status, quality or problems.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com