1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop;
2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter should be re-matched.
3. Check whether each of the paper cores and the corresponding film are aligned, otherwise adjust them;
Slip axis and air shaft of slitting machine--
The inflation shaft is a special type of winding and unwinding, that is, the shaft that can be raised by the surface after high pressure inflation.
After deflation, the surface part (referring to the key bar) is quickly retracted. Its name is diversified, also known as pneumatic shaft, expansion shaft, inflation shaft, air expansion roller, inflation shaft, pressure shaft, air expansion roller, etc.
The slip axis, also known as the slip type air-up axis, is a special segmentation of the gas-increasing shaft, independent slip and torque setting structure, which will solve the unwinding phenomenon caused by the thickness and uneven tension of each roll of material. Can effectively improve product quality and work efficiency.
Slitting machine operation guide ---
4 operational requirements
4.1 Preparation before cutting:
4.1.1 Before the cutting, the paper sent from the warehouse or the semi-finished products transferred from the previous process should be checked with the “production work order” to see if the paper quality, quantity, specifications, etc. meet the requirements of the work order. If problems such as quantity or quality are found, they should be promptly submitted to the dispatcher or feedback to the squad leader. After confirmation, the logo will be clearly marked and returned to the warehouse or semi-finished product area, and the qualified products will be re-sorted for cutting. If the feedback is not received, it will be deemed as acceptance. If there are quality problems such as insufficient quantity at the end, the personnel will be responsible.
4.1.2 Lubricate the equipment according to the maintenance requirements of the machine and check whether the safety protection devices of the equipment are effective.
4.1.3 Carefully check the quality of the front and back of the paper, graphics, paper, etc., to avoid the material specifications, model or quality of the products that are put into production do not match the requirements of the cut products.
4.2.1 Carefully check the accuracy and sensitivity of the electronic scale and vernier caliper, confirm whether it meets the requirements for use, and report the abnormality in time to report with the squad leader.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc