Scotch Tape Slitting

Scotch Tape Slitting

Slitting adjustment
1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop;
2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter should be re-matched.
3. Check whether each of the paper cores and the corresponding film are aligned, otherwise adjust them;

Scotch Tape Slitting

Slip axis and air shaft of slitting machine--

 

Features:
1: Inflatable operation time is short, the separation and placement of the inflation shaft and the paper tube can be completed in 3 seconds to complete the inflation and deflation, and it is not necessary to separate any parts on the shaft end side to be tightly engaged with the paper tube.
2: The paper tube is simply placed: in the action of inflation and deflation, the paper tube can be moved and fixed at any position on the shaft surface.
3: The bearing weight is large: the diameter of the shaft can be determined according to the actual needs of the customer, and the high-hardness steel is used to make the bearing weight increase.
4: High economic efficiency: The design of the shaft is special, and it can be applied to all kinds of paper tubes of thick, thin, wide and narrow.
5: Simple maintenance and long use time: The inflation shaft is a single part, and each part in the structure has fixed specifications, which can be used interchangeably, making it easy to maintain.
Specifications: There are a variety of, including 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, 6 inch, 8 inch, 10 inch, 12 inch, etc., according to demand can be processed to produce different specifications of the expansion axis.

 

Scotch Tape Slitting

Slitting machine operation guide ---

3 job responsibilities
3.1 Slicing machine gear duties
3.1.1 Conscientiously abide by the rules and regulations of the company and the production department, and obey the leadership with the monitor.
3.1.2 Proper operation and use of equipment, strict compliance with safe operating procedures, and timely elimination of common faults.
3.1.3 According to the requirements of product quality standards, it is responsible for the quality, consumption, safety and task completion of the machine, and self-inspection and its records.
3.1.4 Responsible for guiding, supervising and managing the work of the machine personnel.
3.1.5 According to the maintenance requirements of the equipment, carefully carry out the maintenance work of the equipment.
3.1.6 Work with the machine personnel to do a good job of cleaning the equipment and the area of ??responsibility.
3.1.7 Carefully carry out the work of handover, and communicate and record the problems existing in the operation of the equipment.
3.1.8 Have the responsibility for care and maintenance of the auxiliary facilities (lighting, emergency lights, tables, chairs, shelves, etc.) belonging to the machine and surrounding.
3.1.9 Complete the other tasks assigned to the squad leader and the superior leader.
3.2 Slitting machine auxiliary duties
3.2.1 Conscientiously abide by the rules and regulations of the company and the production department, obey the management of the vehicle, and strictly abide by the safe operating procedures.
3.2.2 Carefully assist the gear shifter to adjust and troubleshoot the equipment, and timely carry out the sanitary cleaning work within the scope of the equipment responsibility area under its jurisdiction.
3.2.3 Do a good job in preparation before starting the machine, do a good job in paper and product handling, and do a good job in quality self-inspection.
3.2.4 Clean up waste paper, garbage, packaging materials and evacuate the production site in time; cut off the power and air supply of the machine and auxiliary facilities at the end of the work.
3.2.5 Receive raw and auxiliary materials according to the requirements of the gears and do the work and identification of the original and auxiliary materials.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com