High Efficiency Coater

High Efficiency Coater

Slitting adjustment
1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop;
2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter should be re-matched.
3. Check whether each of the paper cores and the corresponding film are aligned, otherwise adjust them;

High Efficiency Coater

Domestic cutting machine development status and outlets ---

First, the status quo of domestic slitting machine
At present, the domestic use of the slitting machine is mainly divided into several stages, and the first stage is mainly used for the main line slitting as one slitting. One slitting is mainly provided to downstream deep processing enterprises, and the downstream customers are divided into secondary slitting or three slitting. The film making manufacturers of this meeting are mainly cut into one slitting, with the competition of film forming enterprises in recent years. Intense, in order to provide better services to downstream customers, film companies have also added a second cut. In one slitting, the most used brand is CommScope, followed by Atlas, and the Japanese slitter is rarely used in one slitting. With the rise of domestic equipment manufacturing industry in recent years, domestic slitting machines have a certain foothold in a slitting process. Of course, compared with foreign slitting machines, there is still a certain gap in domestic slitting machines. From the user's point of view, I personally think that there is a certain misunderstanding, mainly because of the lack of deep understanding of the slitter market. Everyone knows that there must be a performance price ratio when purchasing a piece of equipment. In fact, the performance and price ratio of the above mentioned brands are not necessarily the best. Some people in the United States have done such an experiment. The above-mentioned brand slitting machine is compared with the Japanese Knife cutting machine. When the same film material is cut, the result is that Japan's Kataoka wins, mainly in terms of stability and speed, speed reduction and non-stretching. Japan's Kataoka has shown superior quality and its price is lower than the above brands. Unfortunately, in the domestic film-making enterprises, no one slitting machine used Japan's Kataoka slitting machine. It is a pity that domestic companies have bought foreign second-rate equipment at the highest price. I have researched the US market. Japan's Kataoka has a high market share in the US market. I believe that with the increase in market demand and fierce competition, domestic companies will come out of this misunderstanding and re-recognize the market of slitting machines. Compared with the first slitting, the third slitting and the one slitting, the status quo of the domestic slitting machine is diversified. One slitting is mainly the importing equipment to play the leading role, while the secondary slitting and three slitting fields are in the field. The domestic market has its own magical powers, including Europe, Japan, and Taiwan. In recent years, the domestically produced slitting machines have gradually replaced the trend of foreign brands, resulting in the following results:
1. Foreign advanced cutting technology has gradually flowed to China;
2. The rise of domestic manufacturing;
3. Popularization of advanced control technology;
4, the low cost of manufacturing causes the price of the slitting machine to be low;
The above various reasons have jointly promoted the domestic film-making enterprises to choose domestic slitting machines. As time goes by, I believe that the domestic cutting opportunities become more mature and the performance is better.

High Efficiency Coater

Domestic cutting machine development status and outlets ---

3. Lack of insight into the characteristics of different materials at the time of slitting, distinguishing between control systems and structures
Everyone knows that the physical properties of different materials are inconsistent. Some materials are smooth and firm. Some materials are very soft and soft, and the physical properties of the same material with different thicknesses are not the same. Among the slitting machines, the structure is also different, and there is a lack of changes in the control system due to its structural changes. The difference is rarely studied. In particular, the change in the difference in the control curve is even less known, and its mature control system software is still very few in China. Although some people have tried the application of a slitter control software, the chances of success are very low. Most of them are characterized by “headaches and pains.” Although our company has experienced 7-8 years of hard work, Some experience has been gained and the control system is becoming more mature, but there is still a certain gap compared with the materials covered by well-known foreign brands.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com