Super Clear Tape Roll Slitter

Super Clear Tape Roll Slitter

Slitting machine starts production
1. The winding roller is pressed down, the counter is cleared, and the production is started;
2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the winding to make each volume
The material is wound up and the end face is flush and firm;
3. Always pay attention to product quality during machine operation.
4. The machine has no abnormal sound.
5. Whether the photoelectric tracking operation is normal.
6. When checking the next volume, pay attention to check the surface of the product for quality defects and stick the tape as required.

Super Clear Tape Roll Slitter

Reasons, countermeasures and effects of BOPP film slitting quality ---

Fives. Multilateral

2. The causes and countermeasures of multilateralism:
(1) The mother roll is seriously deviated, wrinkled or uneven in thickness. When the film runs to the sipe roll, it does not stick to the roller and appears multilateral. It is necessary to improve the quality of film production.
(2) Due to the looseness of the parent roll, the floating roller in the slitting process fails to compensate for the slack in the mother roll in time to cause multilateral occurrence. At this time, it is necessary to accelerate to cope with the problem.
(2) The film roll is not effectively adjusted for the bending roll or the high and low roll or the pull wheel, and the flatness of the film during the slitting process must be improved by effective adjustment;
(3) The blade material does not meet the requirements for use, and the texture is too soft or the friction is deformed by heat. Replace the qualified blade;
(4) Poor cutting control, such as too fast slitting speed, slitting speed and poor sheet/pressure setting. Reasonable adjustment.
(5) The process of slitting due to the loss of sand skin can also cause wrinkles and a multilateral phenomenon.
(6) If the unwinding tension is too small, it will also cause multilateral phenomena.

 

Super Clear Tape Roll Slitter

Reasons, countermeasures and effects of BOPP film slitting quality ---

ten. Color circle
The color circle is caused by a certain degree of contamination inside or outside the film, which causes the quality of the color circle on the end face of the film roll after slitting and winding. Membrane surface pollution sources come from two aspects. One is the film-forming process. The color circles generated in the front part of the film, such as raw materials, feeding systems, extrusion systems, and die flow channels, generally cause pollution to the inside of the film (core layer). Some color-circle products can clearly observe a large amount of fish-eye impurities in the film. The color circles generated in the film-forming stage and the slitting process mainly cause pollution to the outside (surface) of the film, but whether it is internal or external pollution, It is impossible to remove the impurities from the contaminated film and restore the original appearance. The product with serious color circle has low transparency, the film color is different from the normal product, and it can not be used at all. It can only be reduced to other external treatments, while the products with slight color circles are It has little effect on the transparency of the product and does not affect the use effect of the single film. However, due to the inconspicuous appearance of the color circle product, the “selling phase” is poor, which has a great influence on the image of the German brand. It is not suitable for direct delivery. Secondary processing. If the color circle is caused by external dust pollution factors, the dust will be adsorbed on the surface of the film, resulting in poor quality of heat sealing and poor laser compression.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com