Machine To Slit Start A Opp Tape

Machine To Slit Start A Opp Tape

Slitting machine starts production
1. The winding roller is pressed down, the counter is cleared, and the production is started;
2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the winding to make each volume
The material is wound up and the end face is flush and firm;
3. Always pay attention to product quality during machine operation.
4. The machine has no abnormal sound.
5. Whether the photoelectric tracking operation is normal.
6. When checking the next volume, pay attention to check the surface of the product for quality defects and stick the tape as required.

Machine To Slit Start A Opp Tape

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

thirteen. Foreign matter such as dust and small flying insects in the film roll

In addition, paper-end paper dust contamination, contamination of the film roll by the operator and the packaging staff, uneven size of the paper tube, label identification (length, weight, etc.), bumps, poor packaging, etc. are also easy to cut. For quality problems, we must pay attention to every detail during the operation and packaging process. For example, before the slitting machine starts, the film should be neatly placed and attached to the paper tube. The film should not exceed the end of the paper tube. Pay attention to the hands of the operator. Neat and clean environment of the cutting place, the packaging and handling process should be handled with care. When the film roll is moved down the manual forklift, pay attention to the stability, do not hit the film surface, the sealing box of the packaging process, the sticker cap, the sticker The labeling and labeling should be carried out in strict accordance with the specified requirements, position and size. It is not free to ensure the quality of the film products from every link.

Machine To Slit Start A Opp Tape

Slitting machine operation guide ---

4 operational requirements
4.1 Preparation before cutting:
4.1.1 Before the cutting, the paper sent from the warehouse or the semi-finished products transferred from the previous process should be checked with the “production work order” to see if the paper quality, quantity, specifications, etc. meet the requirements of the work order. If problems such as quantity or quality are found, they should be promptly submitted to the dispatcher or feedback to the squad leader. After confirmation, the logo will be clearly marked and returned to the warehouse or semi-finished product area, and the qualified products will be re-sorted for cutting. If the feedback is not received, it will be deemed as acceptance. If there are quality problems such as insufficient quantity at the end, the personnel will be responsible.
4.1.2 Lubricate the equipment according to the maintenance requirements of the machine and check whether the safety protection devices of the equipment are effective.
4.1.3 Carefully check the quality of the front and back of the paper, graphics, paper, etc., to avoid the material specifications, model or quality of the products that are put into production do not match the requirements of the cut products.
4.2.1 Carefully check the accuracy and sensitivity of the electronic scale and vernier caliper, confirm whether it meets the requirements for use, and report the abnormality in time to report with the squad leader.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com