Gum Tape Production Line

Gum Tape Production Line

Slitting machine starts production
1. The winding roller is pressed down, the counter is cleared, and the production is started;
2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the winding to make each volume
The material is wound up and the end face is flush and firm;
3. Always pay attention to product quality during machine operation.
4. The machine has no abnormal sound.
5. Whether the photoelectric tracking operation is normal.
6. When checking the next volume, pay attention to check the surface of the product for quality defects and stick the tape as required.

Gum Tape Production Line

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

It should be noted that although the quality index of the film has a tolerance upper and lower limit, such as 10m wrinkle, film width ± 2mm, end face irregularity ≤ 1 mm, etc., tolerance is the limit of product quality acceptance, but Does not mean that our products can be continuous or close to the upper and lower limits of the tolerance during the slitting process. When we find that the product is at or near the upper and lower limits of the quality tolerance, the production operation or equipment must have an abnormal situation, we must Take immediate measures to correct, eliminate the influencing factors, and ensure the continuous stability and improvement of product quality.

Gum Tape Production Line

Slitting machine operation guide ---

4 operational requirements

4.2 Slitting
4.2.1 When loading paper, it is necessary to standardize the operation. If there are products that do not meet the quality requirements, the products should be picked out and clearly marked, and feedback should be sent to the squad leader.
4.2.2 Before the official production, the crew must pass the start-up information to each other, and it is not allowed to stack debris that interferes with the operation around the machine. The captain (blocking vehicle) shall compare the trial production sample with the standard proof, and self-check the product size specification. After confirming the pass, sign the first proof, and the sample will be retained until the end of the project.
4.2.3 When cutting, it is necessary to see the product specifications and determine in advance whether the size of the slitting knife meets the product quality requirements.
4.2.4 Each group of products must be self-tested, and the quality requirements and production process control shall be carried out according to the “Product Printing Process Card”.
4.2.5 After each group of products has been cut, the product label is affixed to the self-test and the production record is filled. The products to be re-rolled are processed on the shift; the items to be treated or scrapped are labeled and transferred to the treated area or waste as required. Area. The label of each product must clearly and accurately indicate the current product status, quality or problems.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com