Slitting machine starts production
1. The winding roller is pressed down, the counter is cleared, and the production is started;
2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the winding to make each volume
The material is wound up and the end face is flush and firm;
3. Always pay attention to product quality during machine operation.
4. The machine has no abnormal sound.
5. Whether the photoelectric tracking operation is normal.
6. When checking the next volume, pay attention to check the surface of the product for quality defects and stick the tape as required.
Slitting machine operation guide ---
4 operational requirements
4.2.6 The customer is the product of Xiamen Cigarette Factory, and the length of the reel is cut. The weight of the reel label is filled in the theoretical weight of each product (see the attached table for the theoretical weight of each product). After the self-inspection is passed, the scale needs to be scaled one by one. The weight of the product is kept rounded to two digits after the decimal point. The weight of the product registered in the certificate and machine record table should be consistent, and the record should be true and accurate.
4.2.7 The products that have passed the self-test and the internal and external labels are neatly stacked on the tray. The number of products stacked on each tray and each tray is specified in the “Product Printing Process Card” and fixed with a cannula.
4.2.8 If the product does not meet the quality requirements, it needs to be removed or the product quality is in doubt. It is necessary to carry out re-inspection and strictly follow the “Rewinding Machine Operation Guide”.
4.2.9 Timely labeling and isolating materials, products, and materials to be processed at the production site, and taking the squad leader in charge of process identification and traceability operation control and integrated management according to the “identification and traceability control procedures”. After each shift is completed, the production report should be taken to the monitor.
4.2.10 If the product to be treated has not been processed within 2 working days, it should be reported to the workshop with the squad leader for timely disposal.
4.2.11 When the cutting machine is changed, it must be strictly in accordance with the “Regulations on the Management of Shop Closing”.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
When it comes to the efficiency of the slitter, many people think that the efficiency of the slitter is only related to the speed of the slitter. Actually, I think that the efficiency of the slitter is related to the following factors: slitting speed, finished product. Rate, non-operation time, stability, etc. Although the cutting speed is an important indicator of the working efficiency of the slitting machine, if the yield is low, not only will the work efficiency of the whole machine be low, but also the cost will increase. Similarly, if the non-operation takes a long time, such as: adjusting the machine, setting the tool, changing the tool, refueling, connecting the joint, changing the volume, processing the problem, etc., it takes a long time to improve the speed of the slitter, and it makes no sense. It is. Not to mention the stability of the slitting machine, not only will it affect the working efficiency of the slitting machine, but also affect the quality of the product, and it will cause trouble and unnecessary waste to the next process. Therefore, the efficiency of the slitter is a comprehensive concept.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc