Adhesive Tape Cutting Rewinding Machine

Adhesive Tape Cutting Rewinding Machine

Slitting machine shutdown operation
1. After the cutting is completed, the unloading is stopped;
2. Release the switch and lift the cutter unit.
3. Clean the crimping device and turn off the curling blower.
4. Turn off the photoelectric tracking system.
5. Turn off the power and air supply of the whole machine.
6. Clean up the surrounding environment.
7. Carefully fill in the production daily record, product self-checklist and other work records.

Adhesive Tape Cutting Rewinding Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

thirteen. Foreign matter such as dust and small flying insects in the film roll

In addition, paper-end paper dust contamination, contamination of the film roll by the operator and the packaging staff, uneven size of the paper tube, label identification (length, weight, etc.), bumps, poor packaging, etc. are also easy to cut. For quality problems, we must pay attention to every detail during the operation and packaging process. For example, before the slitting machine starts, the film should be neatly placed and attached to the paper tube. The film should not exceed the end of the paper tube. Pay attention to the hands of the operator. Neat and clean environment of the cutting place, the packaging and handling process should be handled with care. When the film roll is moved down the manual forklift, pay attention to the stability, do not hit the film surface, the sealing box of the packaging process, the sticker cap, the sticker The labeling and labeling should be carried out in strict accordance with the specified requirements, position and size. It is not free to ensure the quality of the film products from every link.

Adhesive Tape Cutting Rewinding Machine

Slitting machine operation guide ---

4 operational requirements

4.2 Slitting
4.2.1 When loading paper, it is necessary to standardize the operation. If there are products that do not meet the quality requirements, the products should be picked out and clearly marked, and feedback should be sent to the squad leader.
4.2.2 Before the official production, the crew must pass the start-up information to each other, and it is not allowed to stack debris that interferes with the operation around the machine. The captain (blocking vehicle) shall compare the trial production sample with the standard proof, and self-check the product size specification. After confirming the pass, sign the first proof, and the sample will be retained until the end of the project.
4.2.3 When cutting, it is necessary to see the product specifications and determine in advance whether the size of the slitting knife meets the product quality requirements.
4.2.4 Each group of products must be self-tested, and the quality requirements and production process control shall be carried out according to the “Product Printing Process Card”.
4.2.5 After each group of products has been cut, the product label is affixed to the self-test and the production record is filled. The products to be re-rolled are processed on the shift; the items to be treated or scrapped are labeled and transferred to the treated area or waste as required. Area. The label of each product must clearly and accurately indicate the current product status, quality or problems.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com