Slitting Machine For Bopp Film

Slitting Machine For Bopp Film

Daily maintenance and maintenance of the slitter:
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.
Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross-cutting cutters are used.
   Third, the daily maintenance of the slitting machine should be in place. The standard is that smooth, clean, clear (no dust, no debris) is in place to ensure that the sliding part of the equipment is in good condition.
Fourth, it is the maintenance work, and the regular and irregular inspections of the rotating parts should be stopped (especially the real-time monitoring of the wearing parts should be stopped). Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is achieved.
Fifth, improve the technical quality and degree of the personnel who operate the slitting machine. The control of the local operation must be done by a special person, and no one can operate it without any permission.

Slitting Machine For Bopp Film

Reasons, countermeasures and effects of BOPP film slitting quality ---

Fives. Multilateral

2. The causes and countermeasures of multilateralism:
(1) The mother roll is seriously deviated, wrinkled or uneven in thickness. When the film runs to the sipe roll, it does not stick to the roller and appears multilateral. It is necessary to improve the quality of film production.
(2) Due to the looseness of the parent roll, the floating roller in the slitting process fails to compensate for the slack in the mother roll in time to cause multilateral occurrence. At this time, it is necessary to accelerate to cope with the problem.
(2) The film roll is not effectively adjusted for the bending roll or the high and low roll or the pull wheel, and the flatness of the film during the slitting process must be improved by effective adjustment;
(3) The blade material does not meet the requirements for use, and the texture is too soft or the friction is deformed by heat. Replace the qualified blade;
(4) Poor cutting control, such as too fast slitting speed, slitting speed and poor sheet/pressure setting. Reasonable adjustment.
(5) The process of slitting due to the loss of sand skin can also cause wrinkles and a multilateral phenomenon.
(6) If the unwinding tension is too small, it will also cause multilateral phenomena.

 

Slitting Machine For Bopp Film

Reasons, countermeasures and effects of BOPP film slitting quality ---

eleven. Width deviation is too large
     The width of the film roll is limited by the gap of the sipe roll. The actual slit width will deviate from the width required for the order, but the deviation should be controlled within the tolerance range of ±2mm required by the national standard. The so-called width deviation Large, that is, the actual width of the film roll exceeds the requirements of internal control standards or customer standards.
     Not all products have a tolerance of ±2mm, and some customers can only take deviations from the film width, such as the Pd film of Kunshan Zhangpu, the LL film of Shanghai Zhicheng, the PL film of Beijing Amcor, etc. It is required to adjust the film width.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com