Daily maintenance and maintenance of the slitter:
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.
Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross-cutting cutters are used.
Third, the daily maintenance of the slitting machine should be in place. The standard is that smooth, clean, clear (no dust, no debris) is in place to ensure that the sliding part of the equipment is in good condition.
Fourth, it is the maintenance work, and the regular and irregular inspections of the rotating parts should be stopped (especially the real-time monitoring of the wearing parts should be stopped). Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is achieved.
Fifth, improve the technical quality and degree of the personnel who operate the slitting machine. The control of the local operation must be done by a special person, and no one can operate it without any permission.
Reasons, countermeasures and effects of BOPP film slitting quality ---
eleven. Width deviation is too larg
Each user orders the film according to the shrinkage rate of the processed object and the film to accurately calculate the film width, try to get the lowest value to reduce the production cost. Therefore, the slit film width is too small, it is very easy to cause users. The processing width is not enough, and the film width is too large, which causes waste on the user's materials. In both cases, the user's complaint or even compensation may be caused. In actual operation, although the film width has a certain tolerance, the film width should be adjusted as much as possible on the standard width of the production construction sheet.
Excessive deviation of film width is generally caused by human factors. Therefore, in the process of slitting, we need to detect the film width in the first time after conversion, transfer of specifications, transfer, equipment cleaning, equipment maintenance, adjustment of the tool holder, and replacement of the blade. The problem of preventing excessive deviation of the film width occurs.
Slip axis and air shaft of slitting machine--
Sliding gas rising shaft structure characteristics and principle: Slip type gas rising shaft mainly consists of mandrel, airbag, slip sleeve and other parts.
Air enters the inside of the air bag to cause air expansion, pushes each torque group to expand outward, and sets the slip torque value of each torque group according to the inflation pressure, which is convenient for controlling the tension adjustment of each roll of material on the slitter. .
The slip type air rising shaft is mainly used for the striping equipment with high quality requirements and fast speed.
Slip-type air-up shaft technical parameters: slip-type air-up shaft main body outer diameter Φ75mm, action outer diameter Φ78mm, suitable for paper tube Φ76±0.2mm.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc