Daily maintenance and maintenance of the slitter:
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.
Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross-cutting cutters are used.
Third, the daily maintenance of the slitting machine should be in place. The standard is that smooth, clean, clear (no dust, no debris) is in place to ensure that the sliding part of the equipment is in good condition.
Fourth, it is the maintenance work, and the regular and irregular inspections of the rotating parts should be stopped (especially the real-time monitoring of the wearing parts should be stopped). Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is achieved.
Fifth, improve the technical quality and degree of the personnel who operate the slitting machine. The control of the local operation must be done by a special person, and no one can operate it without any permission.
Slitting machine operation guide ---
8.1 The cutting personnel shall record the production status in the “production record of the cutting machine” and other related records, insert the product into the “product tracking card”, and fill in the corresponding content in time according to the column and frequency requirements set in the record. The disk customers fill in the theoretical weight of each product for the weight of the product label of the Xiamen Cigarette Factory (see the attached table for the theoretical weight of each product), and the content is complete, clear, true and accurate.
8.2 Records should not be filled in with a pencil. The record holder should sign the quality record and indicate the time the record was filled.
8.3 The records listed in the record (except the remarks column) should be filled in. If the corresponding content is not found or there is no item, it can be recorded by slashing. The operator should write the full name and must not only write the last name.
8.4 Record changes caused by mistakes, etc. shall not exceed three pages per page. The records shall be clearly identifiable after the change. For all kinds of quality records that are validated and validated by the product and system, the change shall be stamped with a proofreading or marked change. people.
Domestic cutting machine development status and outlets ---
5. Strategically lacking deeper cooperation with film-making companies
China has made tremendous changes in the economy in the past decade or so. Film-making enterprises have grown from scratch, from large to strong, and film-making enterprises have been listed on domestic and overseas stock markets, with dozens of them, and the key slitting machine industry is currently facing The small scale and low output value are extremely disproportionate to the scale of the film-making industry. There are two reasons for the above phenomenon: First, for the manufacturing of slitting machine enterprises, the opportunity has not been seized in time, and The knowledgeable film-making enterprises have jointly developed the domestic and foreign slitting machine market. Secondly, from the perspective of film-making enterprises, they have not been able to support some cutting-edge machine enterprises with promising prospects from reducing manufacturing costs, and jointly research and develop production slitting. device. If the film-making enterprises can reduce the purchase cost and operating cost, the price competition faced by today's film-making enterprises will be alleviated, and at the same time, the world-class cutting machine enterprises will be created.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc