Daily maintenance and maintenance of the slitter:
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.
Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross-cutting cutters are used.
Third, the daily maintenance of the slitting machine should be in place. The standard is that smooth, clean, clear (no dust, no debris) is in place to ensure that the sliding part of the equipment is in good condition.
Fourth, it is the maintenance work, and the regular and irregular inspections of the rotating parts should be stopped (especially the real-time monitoring of the wearing parts should be stopped). Regular adjustments are made, regular changes are made, commutators are carefully recorded, and the purpose of extending the service life of the equipment is achieved.
Fifth, improve the technical quality and degree of the personnel who operate the slitting machine. The control of the local operation must be done by a special person, and no one can operate it without any permission.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
In the modern packaging industry, the slitting machine is a relatively important equipment that is often used before and after printing. The raw materials are mainly cut before printing, such as paper, plastic film and so on. This is a process that raw material manufacturers must complete in order to meet the width requirements of packaging manufacturers such as customers. The slitting machine is used to divide the printing and composite film of a plurality of sets of patterns of a fixed width into a finished film roll to adapt to the subsequent automatic packaging and bag making process.
With the improvement of flexible packaging automation and consumer goods manufacturers focusing on reducing the inefficiency and pollution of intermediate links, some manufacturers have gradually changed the process and replaced manual packaging with more automated automatic packaging lines. As the demand for coils continues to increase, the position of the slitter is becoming more and more important, and higher requirements are placed on the efficiency of the slitter.
Domestic cutting machine development status and outlets ---
3. Lack of insight into the characteristics of different materials at the time of slitting, distinguishing between control systems and structures
Everyone knows that the physical properties of different materials are inconsistent. Some materials are smooth and firm. Some materials are very soft and soft, and the physical properties of the same material with different thicknesses are not the same. Among the slitting machines, the structure is also different, and there is a lack of changes in the control system due to its structural changes. The difference is rarely studied. In particular, the change in the difference in the control curve is even less known, and its mature control system software is still very few in China. Although some people have tried the application of a slitter control software, the chances of success are very low. Most of them are characterized by “headaches and pains.” Although our company has experienced 7-8 years of hard work, Some experience has been gained and the control system is becoming more mature, but there is still a certain gap compared with the materials covered by well-known foreign brands.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc