Tape slitting machine technical parameters
One: Introduction to tape slitting machine
The slitting machine mainly divides the large-rolled master roll into products of different widths and can check the quality of the product. Its main features are as follows:
1. Unwinding photoelectric correction, high precision; divided into two files: manual and automatic
2, there can be two ways of winding: surface winding and center winding;
3. The unwinding tension adopts automatic tension;
4, round knife cutting, reliable quality, easy to adjust;
5, using the surface center winding, the winding quality is even and stable;
6, the fixed length automatically stops, the length automatically counts the meter;
7, has a trimming device, the edge material is discharged by the fan;
8. Particularly suitable for slitting of narrow strips (insulating materials, mica tapes, films, etc.)
Reasons, countermeasures and effects of BOPP film slitting quality ---
twelve. Interface quality problem (poor interface quality, interface identifier does not match)
3. Interface length and interface rate requirements
Since the interface products will inevitably generate certain scraps before and after the interface, and the quality of the interface products cannot reach 100% of the quality level of the interfaceless products, increasing the loss of use, therefore, the film manufacturers and users are The number of interfaces of the volume product and the interface ratio of each batch of products are specified, so that the interface products are controlled within a certain range.
Slitting machine operation guide ---
4 operational requirements
4.2.1 When loading paper, it is necessary to standardize the operation. If there are products that do not meet the quality requirements, the products should be picked out and clearly marked, and feedback should be sent to the squad leader.
4.2.2 Before the official production, the crew must pass the start-up information to each other, and it is not allowed to stack debris that interferes with the operation around the machine. The captain (blocking vehicle) shall compare the trial production sample with the standard proof, and self-check the product size specification. After confirming the pass, sign the first proof, and the sample will be retained until the end of the project.
4.2.3 When cutting, it is necessary to see the product specifications and determine in advance whether the size of the slitting knife meets the product quality requirements.
4.2.4 Each group of products must be self-tested, and the quality requirements and production process control shall be carried out according to the “Product Printing Process Card”.
4.2.5 After each group of products has been cut, the product label is affixed to the self-test and the production record is filled. The products to be re-rolled are processed on the shift; the items to be treated or scrapped are labeled and transferred to the treated area or waste as required. Area. The label of each product must clearly and accurately indicate the current product status, quality or problems.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc