Tape slitting machine technical parameters
One: Introduction to tape slitting machine
The slitting machine mainly divides the large-rolled master roll into products of different widths and can check the quality of the product. Its main features are as follows:
1. Unwinding photoelectric correction, high precision; divided into two files: manual and automatic
2, there can be two ways of winding: surface winding and center winding;
3. The unwinding tension adopts automatic tension;
4, round knife cutting, reliable quality, easy to adjust;
5, using the surface center winding, the winding quality is even and stable;
6, the fixed length automatically stops, the length automatically counts the meter;
7, has a trimming device, the edge material is discharged by the fan;
8. Particularly suitable for slitting of narrow strips (insulating materials, mica tapes, films, etc.)
Slitting machine operation guide ---
5 handling of abnormal conditions
5.1 Once the quality problem is found in the cutting process, it should be stopped immediately and recorded. The products that cannot be processed should be strictly distinguished, and the label should be marked and reported to the workshop to be handled by the monitor.
5.2 If the abnormal cutting process, abnormal smell, high temperature or sudden failure occurs, the machine should stop immediately. The machine personnel should fill in the “equipment failure repair order” and submit it to the squad leader for confirmation. Also recorded in the production record. 5.3 Timely feedback to the squad leader for problems that cannot be dealt with with quality, equipment, materials, and crafts.
5.4 Equipment failure Machine personnel should actively cooperate with the machine repair to debug, and record the equipment failure, the amount of damage, etc. in the "machine failure debugging consumption table", signed and confirmed by the machine personnel, the shift supervisor, and the machine repair class. The number of equipment faults after on-site confirmation is not included in the consumption assessment.
5.5 When the machine is running, it is strictly prohibited to be unattended.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
In the process of slitting, the stable tension system is an important indicator to ensure the quality of the product. It controls the mutual tension between unwinding, drawing, slitting, winding, etc., so that the slitting material is always in the cutting process. A steady state. If the tension is properly controlled, it can avoid the deformation and drift of the raw materials during the process of speeding up and slowing down the machine. Generally, the unwinding tension is slightly larger than the sum of the reel tensions. Most of the previous slitting machines use magnetic powder clutch to control the tension, but the magnetic powder clutch speed can not be high. It is easy to cause high-speed friction of the magnetic powder during operation, which causes high temperature and shortens its life. In severe cases, it will be stuck and the machine operation will be blocked. With the development of science and technology, the use of servo drive technology, most of them now use vector variable frequency motor to control the tension system of the slitting machine. The automatic detection of the pendulum roller makes the man-machine interface intuitive, the tension system is more stable and reliable, and easy to operate.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc