Four Shaft Auto Roll Cutting Machine

Four Shaft Auto Roll Cutting Machine

Tape cutting machine range:
1. Applicable substrate: mica tape, paper, insulation material and film slitting
2, applicable industry: related industries with various insulating materials, special electrical paper, film
3. Applicable technology: sub-distribution, finished product inspection, finished product sub-volume, process cutting

Four Shaft Auto Roll Cutting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

Fives. Multilateral

2. The causes and countermeasures of multilateralism:
(1) The mother roll is seriously deviated, wrinkled or uneven in thickness. When the film runs to the sipe roll, it does not stick to the roller and appears multilateral. It is necessary to improve the quality of film production.
(2) Due to the looseness of the parent roll, the floating roller in the slitting process fails to compensate for the slack in the mother roll in time to cause multilateral occurrence. At this time, it is necessary to accelerate to cope with the problem.
(2) The film roll is not effectively adjusted for the bending roll or the high and low roll or the pull wheel, and the flatness of the film during the slitting process must be improved by effective adjustment;
(3) The blade material does not meet the requirements for use, and the texture is too soft or the friction is deformed by heat. Replace the qualified blade;
(4) Poor cutting control, such as too fast slitting speed, slitting speed and poor sheet/pressure setting. Reasonable adjustment.
(5) The process of slitting due to the loss of sand skin can also cause wrinkles and a multilateral phenomenon.
(6) If the unwinding tension is too small, it will also cause multilateral phenomena.

 

Four Shaft Auto Roll Cutting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

Seven. Sharp edge
The curling occurs at the edge of the film winding, which causes the curling. The reason is that the edge of the thick film is curled up and the edge part is lifted up; the second is that the winding is too tight, and the tension can be shortened by slitting. Speed ??to improve the resulting edge curling phenomenon; third, the cutter is too blunt, and the stretching phenomenon occurs at the slit when slitting, causing the edge of the film roll to be turned outwards after winding to cause the curling edge, and the cutting should be replaced in time. The knife can avoid the occurrence of the curling problem; the fourth is that the tool is not installed correctly, such as the blade is close to the edge of the sipe and the blade is passivated. Cutting with a round knife can improve the curling of the film roll.
In the use of the unwinding process, there will be different degrees of side-floating in the unwinding process, and it is impossible to track the alignment with the electric eye, which directly affects the use effect. Therefore, it is necessary to change the product with the curled edge.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com