Cello Tape Siltter Slicing Machine

Cello Tape Siltter Slicing Machine

Tape slitting machine principle:
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.

Cello Tape Siltter Slicing Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

three. Irregular end faces

2. The effect of uneven end faces on usage
Regardless of the type and purpose of the film, the problem of "alignment" is involved, and the user generally uses the form of electric eye tracking to perform alignment. The film roll with irregular end faces, the wrong film layer appears to be bent under the pressure of the package, and the electric eye is difficult to track during use, which affects the use effect, such as inaccurate printing overprinting, misalignment of the bag, and the like. In addition, the film roll with irregular end faces is inconspicuous, and the "selling phase" is poor, which affects the brand image of the product.

Cello Tape Siltter Slicing Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

nine. Scratch

     In addition, sometimes scratches due to slitting are difficult to detect by the naked eye, but scratches (scratches) will attenuate the corona value of the product. According to experience, the corona value is reduced by about half in the normal cutting process. Dyne, when the corona values ??differ by more than one dyne before and after cutting, the reasons for the cutting process, such as the speed ratio of the driving roller, the quality of the sand skin, the condition of the sipe roll, etc., should be checked to eliminate the influence. .
     It is worth mentioning that there is a kind of abrasion that is caused by the slitting process, but it is mainly caused by the cutting factor. It is mainly that the mother roll is too loose, and the product of the loose part is horizontally or vertically tilted during the slitting process. While scratching the film surface, it is found that the phenomenon is to install the upper splint on the mother roll for positioning, and secondly, the cutting speed should be properly controlled, and the influence of the quality of the mother roll on the cutting quality can be improved as much as possible.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com