Tape slitting machine principle：
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.
Reasons, countermeasures and effects of BOPP film slitting quality ---
eleven. Width deviation is too large
The width of the film roll is limited by the gap of the sipe roll. The actual slit width will deviate from the width required for the order, but the deviation should be controlled within the tolerance range of ±2mm required by the national standard. The so-called width deviation Large, that is, the actual width of the film roll exceeds the requirements of internal control standards or customer standards.
Not all products have a tolerance of ±2mm, and some customers can only take deviations from the film width, such as the Pd film of Kunshan Zhangpu, the LL film of Shanghai Zhicheng, the PL film of Beijing Amcor, etc. It is required to adjust the film width.
Slitting machine operation guide ---
3 job responsibilities
3.1 Slicing machine gear duties
3.1.1 Conscientiously abide by the rules and regulations of the company and the production department, and obey the leadership with the monitor.
3.1.2 Proper operation and use of equipment, strict compliance with safe operating procedures, and timely elimination of common faults.
3.1.3 According to the requirements of product quality standards, it is responsible for the quality, consumption, safety and task completion of the machine, and self-inspection and its records.
3.1.4 Responsible for guiding, supervising and managing the work of the machine personnel.
3.1.5 According to the maintenance requirements of the equipment, carefully carry out the maintenance work of the equipment.
3.1.6 Work with the machine personnel to do a good job of cleaning the equipment and the area of ??responsibility.
3.1.7 Carefully carry out the work of handover, and communicate and record the problems existing in the operation of the equipment.
3.1.8 Have the responsibility for care and maintenance of the auxiliary facilities (lighting, emergency lights, tables, chairs, shelves, etc.) belonging to the machine and surrounding.
3.1.9 Complete the other tasks assigned to the squad leader and the superior leader.
3.2 Slitting machine auxiliary duties
3.2.1 Conscientiously abide by the rules and regulations of the company and the production department, obey the management of the vehicle, and strictly abide by the safe operating procedures.
3.2.2 Carefully assist the gear shifter to adjust and troubleshoot the equipment, and timely carry out the sanitary cleaning work within the scope of the equipment responsibility area under its jurisdiction.
3.2.3 Do a good job in preparation before starting the machine, do a good job in paper and product handling, and do a good job in quality self-inspection.
3.2.4 Clean up waste paper, garbage, packaging materials and evacuate the production site in time; cut off the power and air supply of the machine and auxiliary facilities at the end of the work.
3.2.5 Receive raw and auxiliary materials according to the requirements of the gears and do the work and identification of the original and auxiliary materials.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc