Tape slitting machine principle：
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.
Slitting machine operation guide ---
8.1 The cutting personnel shall record the production status in the “production record of the cutting machine” and other related records, insert the product into the “product tracking card”, and fill in the corresponding content in time according to the column and frequency requirements set in the record. The disk customers fill in the theoretical weight of each product for the weight of the product label of the Xiamen Cigarette Factory (see the attached table for the theoretical weight of each product), and the content is complete, clear, true and accurate.
8.2 Records should not be filled in with a pencil. The record holder should sign the quality record and indicate the time the record was filled.
8.3 The records listed in the record (except the remarks column) should be filled in. If the corresponding content is not found or there is no item, it can be recorded by slashing. The operator should write the full name and must not only write the last name.
8.4 Record changes caused by mistakes, etc. shall not exceed three pages per page. The records shall be clearly identifiable after the change. For all kinds of quality records that are validated and validated by the product and system, the change shall be stamped with a proofreading or marked change. people.
The basic knowledge of the slitting machine and its development process --
Basic knowledge and development of slitting machine
When it comes to the efficiency of the slitter, many people think that the efficiency of the slitter is only related to the speed of the slitter. Actually, I think that the efficiency of the slitter is related to the following factors: slitting speed, finished product. Rate, non-operation time, stability, etc. Although the cutting speed is an important indicator of the working efficiency of the slitting machine, if the yield is low, not only will the work efficiency of the whole machine be low, but also the cost will increase. Similarly, if the non-operation takes a long time, such as: adjusting the machine, setting the tool, changing the tool, refueling, connecting the joint, changing the volume, processing the problem, etc., it takes a long time to improve the speed of the slitter, and it makes no sense. It is. Not to mention the stability of the slitting machine, not only will it affect the working efficiency of the slitting machine, but also affect the quality of the product, and it will cause trouble and unnecessary waste to the next process. Therefore, the efficiency of the slitter is a comprehensive concept.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc