Auto Tape Roll Cutting Machine

Auto Tape Roll Cutting Machine

Tape slitting machine principle:
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.

Auto Tape Roll Cutting Machine

The basic knowledge of the slitting machine and its development process --

Basic knowledge and development of slitting machine
       In the modern packaging industry, the slitting machine is a relatively important equipment that is often used before and after printing. The raw materials are mainly cut before printing, such as paper, plastic film and so on. This is a process that raw material manufacturers must complete in order to meet the width requirements of packaging manufacturers such as customers. The slitting machine is used to divide the printing and composite film of a plurality of sets of patterns of a fixed width into a finished film roll to adapt to the subsequent automatic packaging and bag making process.
       With the improvement of flexible packaging automation and consumer goods manufacturers focusing on reducing the inefficiency and pollution of intermediate links, some manufacturers have gradually changed the process and replaced manual packaging with more automated automatic packaging lines. As the demand for coils continues to increase, the position of the slitter is becoming more and more important, and higher requirements are placed on the efficiency of the slitter.

Auto Tape Roll Cutting Machine

Domestic cutting machine development status and outlets ---

First, the status quo of domestic slitting machine
At present, the domestic use of the slitting machine is mainly divided into several stages, and the first stage is mainly used for the main line slitting as one slitting. One slitting is mainly provided to downstream deep processing enterprises, and the downstream customers are divided into secondary slitting or three slitting. The film making manufacturers of this meeting are mainly cut into one slitting, with the competition of film forming enterprises in recent years. Intense, in order to provide better services to downstream customers, film companies have also added a second cut. In one slitting, the most used brand is CommScope, followed by Atlas, and the Japanese slitter is rarely used in one slitting. With the rise of domestic equipment manufacturing industry in recent years, domestic slitting machines have a certain foothold in a slitting process. Of course, compared with foreign slitting machines, there is still a certain gap in domestic slitting machines. From the user's point of view, I personally think that there is a certain misunderstanding, mainly because of the lack of deep understanding of the slitter market. Everyone knows that there must be a performance price ratio when purchasing a piece of equipment. In fact, the performance and price ratio of the above mentioned brands are not necessarily the best. Some people in the United States have done such an experiment. The above-mentioned brand slitting machine is compared with the Japanese Knife cutting machine. When the same film material is cut, the result is that Japan's Kataoka wins, mainly in terms of stability and speed, speed reduction and non-stretching. Japan's Kataoka has shown superior quality and its price is lower than the above brands. Unfortunately, in the domestic film-making enterprises, no one slitting machine used Japan's Kataoka slitting machine. It is a pity that domestic companies have bought foreign second-rate equipment at the highest price. I have researched the US market. Japan's Kataoka has a high market share in the US market. I believe that with the increase in market demand and fierce competition, domestic companies will come out of this misunderstanding and re-recognize the market of slitting machines. Compared with the first slitting, the third slitting and the one slitting, the status quo of the domestic slitting machine is diversified. One slitting is mainly the importing equipment to play the leading role, while the secondary slitting and three slitting fields are in the field. The domestic market has its own magical powers, including Europe, Japan, and Taiwan. In recent years, the domestically produced slitting machines have gradually replaced the trend of foreign brands, resulting in the following results:
1. Foreign advanced cutting technology has gradually flowed to China;
2. The rise of domestic manufacturing;
3. Popularization of advanced control technology;
4, the low cost of manufacturing causes the price of the slitting machine to be low;
The above various reasons have jointly promoted the domestic film-making enterprises to choose domestic slitting machines. As time goes by, I believe that the domestic cutting opportunities become more mature and the performance is better.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com